drywall taper

McIntyre Coatings Ltd.

Victoria, BC Full Time

POSTED ON 8/24/2024 CLOSED ON 9/23/2024

Job Posting for drywall taper at McIntyre Coatings Ltd.

Apply successive coats of compound and sand seams and joints
Apply, level and smooth coats of plaster
Cut and install metal corner beads to protect exterior corners
Fill joints, nail indentations, holes and cracks with joint compound using trowel and broad knife
Finish corners and angles and create decorative designs in finish coat, if required
Measure, cut, fit and install drywall sheets
Mould and install ornamental plaster panels, cornices and trim
Position and secure sheets to metal or wooden studs or joists
Smooth out excess compound and allow coat to dry
Spray acoustic or texture materials over walls and ceilings
Tape over joints using taping machine and embed tape in compound
Trowel or spray coats of stucco over exteriors of buildings to form weatherproof surfaces
Cut openings in lath for heating and ventilation piping, ducts and electrical outlets
Install acoustic tile, hangers for suspended ceilings and metal studs for composition wallboard or lath
Install corner beads and wire mesh around beams to which plaster is to be applied
Install exterior and interior steel studs
Prepare wall and ceiling layouts
Work at heights, on scaffolding or swing stages
Erect and install scaffolding, falsework and other working platforms
Read and interpret blueprints, maps, drawings and specifications
Work Term: Permanent
Work Language: English
Hours: 40 hours per week