What are the responsibilities and job description for the Research Engineer Mechanical position at Intel?
Job Description
This is a Research Engineer position in the Package and Systems research group within Intel CR Technology Development organization. You would be joining a multidisciplinary team of researchers charged with developing novel technologies and package architectures to enable continued semiconductor scaling, mm-wave communications at various length scales, and differentiating capabilities within packaging. If you are interested in a position that combines hands on experimental work with precision engineering then this may be a position for you. In this role you will be responsible for enabling precision e.g. less than 50 nm component placement, at high throughputs in a clean-room environment.
You will be responsible for detailed equipment and process understanding, including but not limited to:
- Alignment fiducial design and registration measurements and influence of the optical system, e.g. lighting, multi-layer features and image processing algorithm selection
- Nanometer level geometric tolerances, inspection and monitors to ensure conformance to these tolerances
- Quantifying and minimizing environmental impacts such as particles, temperature, humidity on process conditions
- Working with equipment vendors to meet challenging programmatic process goals and evaluate hardware modifications
You will work within a team, but have clear individual deliverables with time-constraints.
The ideal candidate should exhibit evidence of the following behavioral traits:
- A learning pre-disposition and desire to connect observation with physical fundamentals
- Initiative, resourcefulness and ability to work through ambiguity
- High attention to detail
- Planning and execution to timeline
Qualifications
You must possess the below minimum qualifications to be initially considered for this position. Preferred qualifications are in addition to the minimum requirements and are considered a plus factor in identifying top candidates. Knowledge and/or experience listed below would be obtained through a combination of your school, work and/or classes and/or research and/or relevant previous job and/or internship experiences.
Minimum Qualifications:
- Possess a PhD in Mechanical Engineering
- 6 months experience in one of the following areas: Precision engineering, Opto-mechanics, Mechatronics or Robotics
Preferred Qualifications:
Minimum of 6 months experience in one of the following areas:
- Sub-micron alignment and positioning systems
- Micro- and/or Nano-fabrication processes and analytical methods
- Theoretical mechanics and characterization methodologies.
Inside this Business Group
As the world's largest chip manufacturer, Intel strives to make every facet of semiconductor manufacturing state-of-the-art -- from semiconductor process development and manufacturing, through yield improvement to packaging, final test and optimization, and world class Supply Chain and facilities support. Employees in the Technology Development and Manufacturing Group are part of a worldwide network of design, development, manufacturing, and assembly/test facilities, all focused on utilizing the power of Moore's Law to bring smart, connected devices to every person on Earth.
Covid Statement
Intel strongly encourages employees to be vaccinated against COVID-19. Intel aligns to federal, state, and local laws and as a contractor to the U.S. Government is subject to government mandates that may be issued. Intel policies for COVID-19 including guidance about testing and vaccination are subject to change over time.
Posting Statement
All qualified applicants will receive consideration for employment without regard to race, color, religion, religious creed, sex, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, military and veteran status, marital status, pregnancy, gender, gender expression, gender identity, sexual orientation, or any other characteristic protected by local law, regulation, or ordinance.
Benefits
We offer a total compensation package that ranks among the best in the industry. It consists of competitive pay, stock, bonuses, as well as, benefit programs which include health, retirement, and vacation. Find more information about all of our Amazing Benefits here: https://www.intel.com/content/www/us/en/jobs/benefits.html
Working Model
This role will be eligible for our hybrid work model which allows employees to split their time between working on-site at their assigned Intel site and off-site. In certain circumstances the work model may change to accommodate business needs.
This is a Research Engineer position in the Package and Systems research group within Intel CR Technology Development organization. You would be joining a multidisciplinary team of researchers charged with developing novel technologies and package architectures to enable continued semiconductor scaling, mm-wave communications at various length scales, and differentiating capabilities within packaging. If you are interested in a position that combines hands on experimental work with precision engineering then this may be a position for you. In this role you will be responsible for enabling precision e.g. less than 50 nm component placement, at high throughputs in a clean-room environment.
You will be responsible for detailed equipment and process understanding, including but not limited to:
- Alignment fiducial design and registration measurements and influence of the optical system, e.g. lighting, multi-layer features and image processing algorithm selection
- Nanometer level geometric tolerances, inspection and monitors to ensure conformance to these tolerances
- Quantifying and minimizing environmental impacts such as particles, temperature, humidity on process conditions
- Working with equipment vendors to meet challenging programmatic process goals and evaluate hardware modifications
You will work within a team, but have clear individual deliverables with time-constraints.
The ideal candidate should exhibit evidence of the following behavioral traits:
- A learning pre-disposition and desire to connect observation with physical fundamentals
- Initiative, resourcefulness and ability to work through ambiguity
- High attention to detail
- Planning and execution to timeline
Qualifications
You must possess the below minimum qualifications to be initially considered for this position. Preferred qualifications are in addition to the minimum requirements and are considered a plus factor in identifying top candidates. Knowledge and/or experience listed below would be obtained through a combination of your school, work and/or classes and/or research and/or relevant previous job and/or internship experiences.
Minimum Qualifications:
- Possess a PhD in Mechanical Engineering
- 6 months experience in one of the following areas: Precision engineering, Opto-mechanics, Mechatronics or Robotics
Preferred Qualifications:
Minimum of 6 months experience in one of the following areas:
- Sub-micron alignment and positioning systems
- Micro- and/or Nano-fabrication processes and analytical methods
- Theoretical mechanics and characterization methodologies.
Inside this Business Group
As the world's largest chip manufacturer, Intel strives to make every facet of semiconductor manufacturing state-of-the-art -- from semiconductor process development and manufacturing, through yield improvement to packaging, final test and optimization, and world class Supply Chain and facilities support. Employees in the Technology Development and Manufacturing Group are part of a worldwide network of design, development, manufacturing, and assembly/test facilities, all focused on utilizing the power of Moore's Law to bring smart, connected devices to every person on Earth.
Covid Statement
Intel strongly encourages employees to be vaccinated against COVID-19. Intel aligns to federal, state, and local laws and as a contractor to the U.S. Government is subject to government mandates that may be issued. Intel policies for COVID-19 including guidance about testing and vaccination are subject to change over time.
Posting Statement
All qualified applicants will receive consideration for employment without regard to race, color, religion, religious creed, sex, national origin, ancestry, age, physical or mental disability, medical condition, genetic information, military and veteran status, marital status, pregnancy, gender, gender expression, gender identity, sexual orientation, or any other characteristic protected by local law, regulation, or ordinance.
Benefits
We offer a total compensation package that ranks among the best in the industry. It consists of competitive pay, stock, bonuses, as well as, benefit programs which include health, retirement, and vacation. Find more information about all of our Amazing Benefits here: https://www.intel.com/content/www/us/en/jobs/benefits.html
Working Model
This role will be eligible for our hybrid work model which allows employees to split their time between working on-site at their assigned Intel site and off-site. In certain circumstances the work model may change to accommodate business needs.
Intern- Mechanical Engineering
Antenna Research Associates Inc -
Laurel, MD
Engineering Technician (Mechanical Assembly & Installation)
Advanced Technology and Research Corporation -
Beltsville, MD
Systems Engineer
Elder Research -
Washington, DC
