What are the responsibilities and job description for the Molding Technician position at ITT Inc.?
Position Summary
ITT Enidine Inc., headquartered in Orchard Park, NY, is a premier supplier of highly engineered industrial shock absorbers and vibration isolation products as well as deceleration devices and products for motion control applications. Our products can be found in use throughout the global industrial, rotorcraft, aviation, defense and rail markets. Our broad range of products, extend equipment life, improve comfort and increase safety and reliability around the globe.ITT Control Technologies offers a very attractive benefits program. Our employees enjoy medical and dental coverage, 401K savings plan, life insurance protection, sickness and accident income protection, a generous vacation and holiday program, a tuition reimbursement program, and a program that allows you to use tax-free dollars to pay for many health care and dependent care expenses.Position Summary:
The qualified applicant will be expected to operate a molding press and perform all primary and secondary operations associated with the molding operations in a safe manner. At a minimum, the technician will be able to set-up a work order to run quality parts, perform basic trouble shooting if problems occur and purge or otherwise close a work order and ready the Press for a new work order without supervision.
This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee or Refugee.
Essential Responsibilities
* Operate all equipment and follow all work instructions as trained in a safe with an attention to quality products.
* Injection or Transfer Molding Machine operation with full understanding of machine controls and operations in both manual and automatic modes.
* Load pre-programed recipes in some presses as well as manual input of molding parameters in older presses. Verify all machine settings match latest revision of the process data sheet at the beginning of each run.
* Able to perform basic trouble shooting during set-up or operation of machine. Will involve Engineering for larger problems.
* Fully trained and signed off as a qualified operator for all molding processes associated with the molding department assigned.
* Able to produce molded parts at the established production rates, not exceed expected scrap rates and inspect / verify that all molded parts meet all quality requirements.
* Follow all work instructions as trained; including but not limited to Molding Manuals, Assembly manuals, Work Orders (routers), Supplemental Quality Inspections, General Workmanship Standards, etc.
* Ability to operate the two roll mill to blend compounds for molding as needed.
Position Requirements
* Ability to lift up to 90lbs occasionally, up to 50lbs regularly.
* Ability to stand for the entire shift.
* Possess the desire to learn additional job functions within the department. (e.g. Assembly; Part prep - masking, blasting, painting; Part marking; Final Assembly and Pack-out; Finished Part Testing; Other miscellaneous duties as needed.
* Must be able to read and write English and pass a basic math test.
* Ability to read part prints/drawings is a plus.
* Must have basic MS Office computer skills and be knowledgeable with Excel and E-mail.
Education and/or Experience:
* Minimum of a high school degree or equivalent is required.
* Higher education in a technical field preferred.
* Previous experience with Injection or Transfer Molding preferred.
ITT Corporation is an Equal Opportunity/Affirmative Action employer and all qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, protected veteran or disability status, or any other characteristic protected by law.
Responsibilities - Operate all equipment and follow all work instructions as trained in a safe with an attention to quality products. - Injection or Transfer Molding Machine operation with full understanding of machine controls and operations in both manual and automatic modes. - Load pre-programed recipes in some presses as well as manual input of molding parameters in older presses. Verify all machine settings match latest revision of the process data sheet at the beginning of each run. - Able to perform basic trouble shooting during set-up or operation of machine. Will involve Engineering for larger problems. - Fully trained and signed off as a qualified operator for all molding processes associated with the molding department assigned. - Able to produce molded parts at the established production rates, not exceed expected scrap rates and inspect / verify that all molded parts meet all quality requirements. - Follow all work instructions as trained; including but not limited to Molding Manuals, Assembly manuals, Work Orders (routers), Supplemental Quality Inspections, General Workmanship Standards, etc. - Ability to operate the two roll mill to blend compounds for molding as needed.
ITT Enidine Inc., headquartered in Orchard Park, NY, is a premier supplier of highly engineered industrial shock absorbers and vibration isolation products as well as deceleration devices and products for motion control applications. Our products can be found in use throughout the global industrial, rotorcraft, aviation, defense and rail markets. Our broad range of products, extend equipment life, improve comfort and increase safety and reliability around the globe.ITT Control Technologies offers a very attractive benefits program. Our employees enjoy medical and dental coverage, 401K savings plan, life insurance protection, sickness and accident income protection, a generous vacation and holiday program, a tuition reimbursement program, and a program that allows you to use tax-free dollars to pay for many health care and dependent care expenses.Position Summary:
The qualified applicant will be expected to operate a molding press and perform all primary and secondary operations associated with the molding operations in a safe manner. At a minimum, the technician will be able to set-up a work order to run quality parts, perform basic trouble shooting if problems occur and purge or otherwise close a work order and ready the Press for a new work order without supervision.
This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee or Refugee.
Essential Responsibilities
* Operate all equipment and follow all work instructions as trained in a safe with an attention to quality products.
* Injection or Transfer Molding Machine operation with full understanding of machine controls and operations in both manual and automatic modes.
* Load pre-programed recipes in some presses as well as manual input of molding parameters in older presses. Verify all machine settings match latest revision of the process data sheet at the beginning of each run.
* Able to perform basic trouble shooting during set-up or operation of machine. Will involve Engineering for larger problems.
* Fully trained and signed off as a qualified operator for all molding processes associated with the molding department assigned.
* Able to produce molded parts at the established production rates, not exceed expected scrap rates and inspect / verify that all molded parts meet all quality requirements.
* Follow all work instructions as trained; including but not limited to Molding Manuals, Assembly manuals, Work Orders (routers), Supplemental Quality Inspections, General Workmanship Standards, etc.
* Ability to operate the two roll mill to blend compounds for molding as needed.
Position Requirements
* Ability to lift up to 90lbs occasionally, up to 50lbs regularly.
* Ability to stand for the entire shift.
* Possess the desire to learn additional job functions within the department. (e.g. Assembly; Part prep - masking, blasting, painting; Part marking; Final Assembly and Pack-out; Finished Part Testing; Other miscellaneous duties as needed.
* Must be able to read and write English and pass a basic math test.
* Ability to read part prints/drawings is a plus.
* Must have basic MS Office computer skills and be knowledgeable with Excel and E-mail.
Education and/or Experience:
* Minimum of a high school degree or equivalent is required.
* Higher education in a technical field preferred.
* Previous experience with Injection or Transfer Molding preferred.
ITT Corporation is an Equal Opportunity/Affirmative Action employer and all qualified applicants will receive consideration without regard to race, color, religion, sex, national origin, protected veteran or disability status, or any other characteristic protected by law.
Responsibilities - Operate all equipment and follow all work instructions as trained in a safe with an attention to quality products. - Injection or Transfer Molding Machine operation with full understanding of machine controls and operations in both manual and automatic modes. - Load pre-programed recipes in some presses as well as manual input of molding parameters in older presses. Verify all machine settings match latest revision of the process data sheet at the beginning of each run. - Able to perform basic trouble shooting during set-up or operation of machine. Will involve Engineering for larger problems. - Fully trained and signed off as a qualified operator for all molding processes associated with the molding department assigned. - Able to produce molded parts at the established production rates, not exceed expected scrap rates and inspect / verify that all molded parts meet all quality requirements. - Follow all work instructions as trained; including but not limited to Molding Manuals, Assembly manuals, Work Orders (routers), Supplemental Quality Inspections, General Workmanship Standards, etc. - Ability to operate the two roll mill to blend compounds for molding as needed.
Recommended Skills
- International Traffic In Arms Regulations
- Machine Controls
- Mathematics
- Microsoft Excel
- Microsoft Office
- Painting
Automotive Technician with West-Herr Kia
Kia Veterans Technician Apprenticeship Program (VTAP) -
Orchard, NY
Technician
Monro, Inc. -
Springville, NY
Maintenance Technician
Jobot -
Elma, NY