Primary Function:
Process castings through radiographic inspection in compliance with company and customer
specifications.
Tools and Equipment:
X-ray machines, x-ray film processors, densitometer, blueprints, etc.
Material:
Aluminum, copper and brass castings, inspection stamps, x-ray film, cassettes, x-ray filn developer.
Direction of Others:
None
Working Procedure:
With guidance and supervision from the Department Supervisor, the Quality Assurance staff, and the
Final Inspector A , the Final Inspector - Radiographic
THE FOLLOWING ARE THE USUAL MAJOR JOB DUTIES BUT THIS JOB DESCRIPTION DOES NOT PRECLUDE THE PERFORMANCE OF
OTHER DUTIES BY THE INCUMBENT.
1 Shall adhere to all safety requirements as posted on the job safety card.
2 Shall consistently follow all applicable work instructions.
3 Shall receive daily work assignments from the department supervisor or lead person.
4 Shall process castings through radiographic inspection, processing and reading, as prescribed
in the instructions in the Non Destructive Test folders.
5 Shall accept or reject casting(s), or lots, based on results of the inspection techniques used.
6 Shall faithfully apply all applicable specifications, and report any apparent deviations to the Quality
Assurance Manager.
7 Shall attend and successfully complete hazardous material / waste handling classes.
8 Shall maintain all necessary inspection records and files, in addition to a variety of logs where
accuracy is paramount.
9 Shall maintain the work area in a clean and orderly condition, and keep noise level to a minimum.
10 Shall safeguard the use of the stamp(s) issued to them, as outlined in the Final Inspection
instructions.
11 Must achieve and maintain Level 1 RT certification in radiographic inspection within ninety days
of start date.
12 Shall attend and successfully complete lockout / tagout training.
13 Shall perform other duties as assigned.
Work Environment:
A clean working environment, free of most contaminants, with a minimum amount of noise.
Special Skills Required:
Must have 20 / 25 near vision (correctable).
Must be able to distinguish colors.
Must have sufficient strength and manual dexterity to perform the physical demands of the job.
Click the checkbox next to the jobs that you are interested in.
Batch Testing Skill
Hazard Analysis and Critical Control Points (HACCP) Skill
Final Inspector B - Mechanical
O'Fallon Casting, Fallon, MO
Final Inspector B - Fluorescent Penetrant
O'Fallon Casting, Fallon, MO