What are the responsibilities and job description for the CNC Machinist III position at QPS Employment Group?
Position Title: CNC Machinist III
Wage: $29.00-$35.00 per hour
Shift:1st
Hours:6:00am-2:30pm
QPS Employment Group has a great CNC Machinist III position available at a company in O'Fallon, MO. This is a direct hire position.
CNC Machinist III Responsibilities include but are not limited to:
- Set up fixturing and precision measuring equipment to produce an acceptable first piece.
- Prepare tooling, fixturing, gauges, materials, and paperwork.
- Complete all necessary documentation per company policy for first piece approval.
- Keep machinery and work area clean, safe, maintained and organized.
- Assist in other areas in order to meet the production needs of WB Industries and its customers.
- Comply with all PPE and machine guarding as necessary with each job.
- Perform sharpening tasks, offsets and adjustments based on tool wear within the current program.
- Measure and check parts.
- Keep waste low, minimize scrap, use labor efficiently, and account for all parts on jobs.
- Improve on product throughput via additional operations i.e. multiple machine operation, de-burring, cleaning, etc.
- Program machine, fixturing, material, and paperwork preparation such as sharpening, locating, verifying, programming, editing, etc.
- Set-up and proof CNC machines for runs to achieve a first piece quality product.
- Set-Up Times and Run-Times: monitor for accuracy and provide necessary changes to Department Supervisor.
- Monitor condition of job specific tooling or holding fixtures, make authorized changes as needed/directed.
- Suggest and implement improvements to the machining process.
- Responsible for writing, creating, and testing CNC programs.
- Ensure the produced CNC programs are optimized.
- Performs adjustments to adhere to established specifications or revisions.
- Monitor machining times and optimize times by recommending new machining techniques and methods to refine existing programs to the Department Supervisor.
- Maintain the jigs and fixtures.
- Demonstrate a full commitment to work closely with machinists, programmers, and Supervisors.
- Ability to operate the Milltronics RH15 at or above company standards for both time and quality.
- Assist in determining daily priorities of the department.
- Adequately supply departmental personnel with needed supplies and assist them through difficulties with troubleshooting techniques.
- Provide timely information of product status and location.
- Ensure proper training of new and less skilled employees.
- Validate and implement any setup, run-time changes or other improvements by team members.
- Strong knowledge of most hand, manual and automatic machinery, fixturing and precision measuring equipment to complete departmental assignments.
- Share knowledge of how-to set up shop equipment and proof to achieve a first-piece quality product.
- Assist in setting production standards and ensuring they are achieved.
- Ensure all employees use proper PPE and machine guarding.
- Enforce company policies and procedures to provide a positive work environment.
- Generate all necessary documentation per company policy RH33 at or above company standards for both time and quality.
- Ability to operate the Mazak 40 Lathe at or above company standards for both time and quality.
CNC Machinist III Requirements:
- Ability to operate all machine shop manual equipment at or above company standards for both time and quality.
- Ability to operate the Mazak VTC-16B, Mazak VTC-20B, 40 Lathe, VTC-200B, and VTC-300C at or above company standards for both time and quality.
- Demonstrates the ability to complete setup steps such as vise alignment, fixture setup, and the importance of a square rigid work piece.
- Ability to operate the Milltronics RH15 and RH33 at or above company standards for both time and quality.
- Ability to operate the Kuraki at or above company standards for both time and quality.
- Medium work. Exerting between 30 to 50 pounds of force regularly.
- Climbing ladders, stairs, scaffolding, ramps, poles, and the like, using feet and legs and/or hands and arms.
- Particularly for sustained periods of time.
- Walking.
- Pushing/Pulling.
- Lifting/Moving.
- Picking, pinching, typing, working, primarily with fingers.
- Applying pressure to an object with the fingers or palm.
- Repetitive motion. Substantial movement of the wrists, hands, and/or fingers.
- High School Diploma or equivalent.
anike.bazua@qpsemployment.com
Branch: Bridgeton MO
About us:
QPS Employment Group is a full-service staffing firm comprised of dedicated and passionate people with over 50 offices throughout the Midwest. We place great people with great companies in industrial, skilled trades, administrative, manufacturing, general labor and professional employment.
Why Work with QPS?
-Access to sought-after positions with leading employers
-Dedicated placement specialists who will guide you through every step of the job search process
Wage: $29.00-$35.00 per hour
Shift:1st
Hours:6:00am-2:30pm
QPS Employment Group has a great CNC Machinist III position available at a company in O'Fallon, MO. This is a direct hire position.
CNC Machinist III Responsibilities include but are not limited to:
- Set up fixturing and precision measuring equipment to produce an acceptable first piece.
- Prepare tooling, fixturing, gauges, materials, and paperwork.
- Complete all necessary documentation per company policy for first piece approval.
- Keep machinery and work area clean, safe, maintained and organized.
- Assist in other areas in order to meet the production needs of WB Industries and its customers.
- Comply with all PPE and machine guarding as necessary with each job.
- Perform sharpening tasks, offsets and adjustments based on tool wear within the current program.
- Measure and check parts.
- Keep waste low, minimize scrap, use labor efficiently, and account for all parts on jobs.
- Improve on product throughput via additional operations i.e. multiple machine operation, de-burring, cleaning, etc.
- Program machine, fixturing, material, and paperwork preparation such as sharpening, locating, verifying, programming, editing, etc.
- Set-up and proof CNC machines for runs to achieve a first piece quality product.
- Set-Up Times and Run-Times: monitor for accuracy and provide necessary changes to Department Supervisor.
- Monitor condition of job specific tooling or holding fixtures, make authorized changes as needed/directed.
- Suggest and implement improvements to the machining process.
- Responsible for writing, creating, and testing CNC programs.
- Ensure the produced CNC programs are optimized.
- Performs adjustments to adhere to established specifications or revisions.
- Monitor machining times and optimize times by recommending new machining techniques and methods to refine existing programs to the Department Supervisor.
- Maintain the jigs and fixtures.
- Demonstrate a full commitment to work closely with machinists, programmers, and Supervisors.
- Ability to operate the Milltronics RH15 at or above company standards for both time and quality.
- Assist in determining daily priorities of the department.
- Adequately supply departmental personnel with needed supplies and assist them through difficulties with troubleshooting techniques.
- Provide timely information of product status and location.
- Ensure proper training of new and less skilled employees.
- Validate and implement any setup, run-time changes or other improvements by team members.
- Strong knowledge of most hand, manual and automatic machinery, fixturing and precision measuring equipment to complete departmental assignments.
- Share knowledge of how-to set up shop equipment and proof to achieve a first-piece quality product.
- Assist in setting production standards and ensuring they are achieved.
- Ensure all employees use proper PPE and machine guarding.
- Enforce company policies and procedures to provide a positive work environment.
- Generate all necessary documentation per company policy RH33 at or above company standards for both time and quality.
- Ability to operate the Mazak 40 Lathe at or above company standards for both time and quality.
CNC Machinist III Requirements:
- Ability to operate all machine shop manual equipment at or above company standards for both time and quality.
- Ability to operate the Mazak VTC-16B, Mazak VTC-20B, 40 Lathe, VTC-200B, and VTC-300C at or above company standards for both time and quality.
- Demonstrates the ability to complete setup steps such as vise alignment, fixture setup, and the importance of a square rigid work piece.
- Ability to operate the Milltronics RH15 and RH33 at or above company standards for both time and quality.
- Ability to operate the Kuraki at or above company standards for both time and quality.
- Medium work. Exerting between 30 to 50 pounds of force regularly.
- Climbing ladders, stairs, scaffolding, ramps, poles, and the like, using feet and legs and/or hands and arms.
- Particularly for sustained periods of time.
- Walking.
- Pushing/Pulling.
- Lifting/Moving.
- Picking, pinching, typing, working, primarily with fingers.
- Applying pressure to an object with the fingers or palm.
- Repetitive motion. Substantial movement of the wrists, hands, and/or fingers.
- High School Diploma or equivalent.
anike.bazua@qpsemployment.com
Branch: Bridgeton MO
About us:
QPS Employment Group is a full-service staffing firm comprised of dedicated and passionate people with over 50 offices throughout the Midwest. We place great people with great companies in industrial, skilled trades, administrative, manufacturing, general labor and professional employment.
Why Work with QPS?
-Access to sought-after positions with leading employers
-Dedicated placement specialists who will guide you through every step of the job search process
CNC Machinist/CNC Machinist Trainee
Advanced CNC Machine LLC -
Saint Martinville, LA
CNC Programmer Machinist
United CNC Machining -
Auburn, MI
CNC Machinist III / Programmer
Amtec Solutions Group -
Huntsville, AL
