HVAC Mechanic jobs in Salt Lake City, UT

HVAC Mechanic performs maintenance and service repairs on heating, ventilating, and air conditioning systems. Installs new units or replacement parts for existing units according to specifications and established safety guidelines. Being an HVAC Mechanic follows blueprints or engineering specifications to install units. Performs troubleshooting to identify the cause of problems. Additionally, HVAC Mechanic maintains and secures a spare parts inventory. Recommends purchasing maintenance equipment and supplies as required to improve processes and efficiencies. Typically requires an apprenticeship and/or completion of technical training. Requires a high school diploma. The regulations governing the location may require an HVAC Mechanical State License and EPA Section 608 Certification (CFC). Typically reports to a supervisor or manager. The HVAC Mechanic works under the close direction of senior personnel in the functional area. Possesses a moderate understanding of general aspects of the job. May require 0-1 year of general work experience. (Copyright 2024 Salary.com)

E
HVAC Mechanic
  • EML, LLC
  • Salt Lake, UT FULL_TIME
  •  

    HVAC Mechanic – Salt Lake City, UT

    NCS/EML Joint Venture is seeking an experienced HVAC Mechanic for our Federal Contract site at the Moss U.S. Court House in Salt Lake City, UT.

    SUMMARY

    HVAC Mechanics will perform maintenance, servicing, and repair of refrigerant-containing equipment/systems to all required specifications.  HVAC Mechanics shall have at least five years of journeyman level experience (obtained within the last seven years) in the field of maintenance, repair and operation of HVAC-related systems.

    DUTIES AND RESPONSIBILITIES INCLUDE:

    • Installs, services and repairs environmental-control systems in residences, office buildings, and other commercial establishments, utilizing knowledge of refrigeration theory, pipefitting, and structural layout.
    • Must have journeyman level knowledge and full capability to repair and service all ranges of package units, split systems, and chiller systems.
    • Must have knowledge and full capability to repair and service all ranges of boiler systems.
    • Mounts compressors and condenser units on platform or floor, using hand tools, following blue prints or engineering specifications.
    • Fabricates, assembles and installs ductwork and chassis parts, using portable metalworking tools and welding equipment.
    • Installs evaporator unit in chassis or in air-duct system, using hand tools.
    • Cuts and bends tubing to correct length and shape, using cutting and bending equipment and tools.
    • Joints tubing or pipes to various refrigerating units by means of sleeves, couplings or unions, and solders joints, using torch, forming complete circuit for refrigerant.
    • Installs expansion and discharge valves in circuit.
    • Connects motors, compressors, temperature controls, humidity controls and circulating ventilation fans to control panels and connects control panels to power source.
    • Installs air and water filters in completed installation.
    • Injects small amount of refrigerant into compressor to tests systems and adds Freon gas to build up prescribed operating pressure.
    • Observes pressure and vacuum gauges and adjusts controls to insure proper operation.
    • Tests joints and connections for gas leaks, using gauges or soap and water solution.
    • Wraps pipes in insulation batting and secures them in place with cement or wire bands.
    • Replaces defective breaker controls, thermostats, switches, fuses and electrical wiring to repair installed units, using electrician's hand tools and test equipment.
    • Other duties as required by the company may be assigned, including other general maintenance tasks.
    QUALIFICATIONS


    To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

    EDUCATION and/or EXPERIENCE

     

    Must possess at least 5 years of recent (within the past 7 years) experience in the inspection, testing, and maintenance of equipment and HVAC systems comparable in complexity to systems at these facilities.  Additionally, all HVAC Mechanics must possess a Universal EPA Certification and one or more of the following certifications:


    1. North American Technician Excellence (N.A.T.E.) HVAC Service Technician Certification'
    2. HVAC Excellence Professional Level Certification
    3. UA Star HVACR Mastery Certification

    A detailed resume containing a thorough description of the previous 7 years of employment history with references and copies of all required certifications must be submitted, as the Contracting Officer has to provide approval prior to the assignment of the project manager to the contract.

    LANGUAGE SKILLS




    Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.

    MATHEMATICAL SKILLS

    Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.

    REASONING ABILITY

    Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.

    PHYSICAL DEMANDS

    The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and reach with hands and arms. The employee frequently is required to stand; walk; climb or balance; stoop, kneel, crouch, or crawl; and talk or hear. The employee must frequently lift and/or move up to 100 pounds.

    WORK ENVIRONMENT

    The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently exposed to wet and/or humid conditions; moving mechanical parts; high, precarious places; and risk of electrical shock. The employee is occasionally exposed to outside weather conditions, extreme cold, and extreme heat. The noise level in the work environment is usually moderate.

    NCS/EML Joint Venture provides a diverse set of support and services for private sector and government contracts throughout the country.  We are proud to be a Drug Free Workplace and an Equal Opportunity Employer.  All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, or national origin.  All candidates for this position must be able to pass all required background checks necessary to obtain and sustain appropriate clearance to secure federal facilities as needed.


  • 15 Days Ago

L
Mechanic
  • Love's
  • Salt Lake, UT FULL_TIME
  • Req ID: 433185 This position offers on-the-job training, full company benefits, company vehicle, weekly pay, a yearly tool allowance, quarterly bonuses and an annual bonus. BASIC PURPOSE: Maintains eq...
  • 21 Days Ago

H
Mechanic A
  • Hertz Local Edition
  • Salt Lake, UT FULL_TIME
  • We are looking for Automotive Technicians with a passion to service vehicles. If this is, you and you’re ready for your next destination then you have cruised to the right spot! Apply today and shift ...
  • Just Posted

S
Mechanic
  • Sulzer Pumps Inc.
  • Salt Lake, UT FULL_TIME
  • Mechanic - Full Time - Salt Lake City, UT At Sulzer, you are empowered to deliver superior results. As a pioneer in industry we have a proud heritage of innovation and continue to evolve for the futur...
  • 3 Days Ago

I
Mechanic
  • ISCO Industries
  • West Jordan, UT FULL_TIME
  • At ISCO, we put high value on appreciation and respect, and provide you with an opportunity to really make a difference. ISCO is a family owned and operated company born and raised in Louisville, KY t...
  • 6 Days Ago

S
Mechanic
  • Sulzer Pump Services (US) Inc.
  • Salt Lake, UT FULL_TIME
  • Mechanic - Full Time - Salt Lake City, UT At Sulzer, you are empowered to deliver superior results. As a pioneer in industry we have a proud heritage of innovation and continue to evolve for the futur...
  • 9 Days Ago

Filters

Clear All

  • Filter Jobs by companies
  • More

0 HVAC Mechanic jobs found in Salt Lake City, UT area

Salt Lake City has an area of 110.4 square miles (286 km2) and an average elevation of 4,327 feet (1,319 m) above sea level. The lowest point within the boundaries of the city is 4,210 feet (1,280 m) near the Jordan River and the Great Salt Lake, and the highest is Grandview Peak, at 9,410 feet (2,868 m). The city is in the northeast corner of the Salt Lake Valley surrounded by the Great Salt Lake to the northwest, the steep Wasatch Range to the east, and Oquirrh Mountains to the west. Its encircling mountains contain several narrow canyons, including City Creek, Emigration, Millcreek, and Par...
Source: Wikipedia (as of 04/11/2019). Read more from Wikipedia
Income Estimation for HVAC Mechanic jobs
$41,029 to $56,378
Salt Lake City, Utah area prices
were up 2.3% from a year ago

HVAC Mechanic in Hialeah, FL
An HVAC mechanic is typically responsible for the maintenance, installation, repair and design of HVAC systems for residential and commercial buildings, and they must be licensed and certified according to state standards in order to provide services and be employed in their field.
December 23, 2019
HVAC Mechanic in Columbus, GA
These workers are also responsible for recognizing when a job is above their skill level and requires the expertise of an electrician; a carpenter; a heating, air-conditioning, and refrigeration mechanic or installer; or a plumber, pipefitter, or steamfitter.
December 15, 2019
HVAC Mechanic in Newark, NJ
HVAC mechanics work on heat pumps, furnaces, air conditioners, refrigeration units and a number of other ventilation and heating and cooling systems.
January 25, 2020
All of these projects will raise demand for HVAC professionals over the coming years.
January 13, 2020