Technical Expert - Light Equipment Fleet

Position Title:  Technical Expert – Light Equipment Fleet   

POSITION OVERVIEW

Highly skilled Light Truck Fleet Trainer that will perform on the job training to advance the skills and ability of the diesel-electric mechanical work force while demonstrating the tasks associated with the removal, repair, installation, system analysis, diagnosis, advanced troubleshooting, and system/process optimization of various Light Equipment Fleet (Light Vehicles, Service Trucks, Welding Machines, Generators, Boom Trucks, Fork Lifts, Bucket Trucks, Man Lifts). This position is a hands-on assignment that will work side-by-side with the workforce to ensure knowledge transfer and the use of best practices in the diesel electric mechanical field.

ESSENTIAL FUNCTIONS:

·         Provide individual mentoring and training for the Diesel Mechanic work force.

·         Review and update standard operating procedures and job task instructions.

·         Recommend and assist in the development of action plans to continuously improve the mechanical repair process and reliability.

·         Continually reinforce best safety practices, company policy and ensure that the work force knows the hazards associated with working around mechanical and electrical systems.

·         Advance the skills and ability of the Diesel Mechanic work force by instructing and demonstrating the ability to remove, repair, replace, test, analyze, diagnose, advance troubleshoot, and optimize equipment such as Chevrolet, Ford, Dodge pick-ups, International, Bluebird, Thomas Freightliner, Gradall, Clark, Unicarrier, Xtreme, Petibone, Genie, Lincoln, Miller, Grove, Linkbelt Cranes, JLG, Peterbuilt Xtreme, Western Star and National Booms including and not limited to:

o   Mu Diesel Engines as in Detroit, CAT, Detroit and Cummins and other various gas and diesel engines in Mining Equipment.

o   Mechanical systems and Engine Brake systems.

o   Engine lubrication system to include, system sensors, filter module, component lubrication, lubrication flow.

o   Engine cooling systems to include, EGR coolers, after treatment systems, coolant control valves, thermostats and system sensors and fan drives.

o   Engine fuel systems to include, primary and secondary fuel systems, fuel supply pump, fuel supply system sensors, high Pressure fuel systems, High pressure fuel lines and pipes, high pressure fuel rails, fuel return, injector quantity correction.

o   Air Management Systems of the Engine to include, Air induction, Charge-Air coolers, Boost control, Air induction sensors, Exhaust gas recirculation, intake throttle valve, crankcase systems.

o   Aftertreatment Systems of the engine to include, PDOC, DOC and DPF systems of tier 3 and 4 Engines, Active and Stationary Strategies, Intake throttle valve and Exhaust back pressure valves, downstream injection systems, Fuel line supply and Aftertreatment injectors, Exhaust sensors, Stationary or parked Regeneration.

o   Electrical onboard diagnostic systems, INSITE, Quick Serve, Ford IDS, Chevrolet AC Delco TDS, CAT IT, Bosch, Allison.

KNOWLEDGE SKILLS AND ABILITIES

·         Operate a computer/Laptop and use maintenance diagnostic computer systems diagnosing faults using computerized testing equipment.

·         Proficient use of Oxygen/Acetylene Torches for Cutting and Heating.

·         Ability to identify petroleum products usage and disposal.

·         Knowledge of procedures and positioning for checking fluid levels on all mine equipment.

·         Knowledge of oil sampling and coolant analysis.

·         Working knowledge of shop, field preventive maintenance process, and field fueling procedures.

·         Must maintain daily service reports, and equipment status reports for technical questions.

·         Strong leadership skills.

·         Ability to teach and mentor.

·         Ability to read, understand, and apply information from technical manuals, drawings, prints, and schematics for installation, troubleshooting and repair including hydraulic, electrical, and pneumatic schematics. 

·         Ability to lead and complete job assignments in a timely manner.

·         Mentor and/or train other diesel-mechanic employees.

·         Ability to be trained and to operate equipment including but not limited to scissor lift, man-lifts, forklift, boom trucks, and overhead cranes.

·         Applicant must have effective written, visual, electronic, and verbal communication skills.

·         Ability to understand and apply verbal and written work and safety related instructions and procedures given in English. 

·         Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions, and decimals.

·         Ability to compute rate, ratio, and percentages and to draw and interpret bar graphs.

·         Ability to manage time effectively and set priorities.

·         Ability to manage multiple tasks.

·         Ability to think under stressful and adverse conditions.

·         Must have teamwork, problem solving, and negotiation skills.

·         The physical requirements of the position are considered Heavy Work: Exerting up to 80 pounds of force occasionally, and/or up to 50 pounds of force frequently, and/or up to 20 pounds of force constantly to move objects.

·         The ability to work in conditions of extreme heat, extreme cold, and vibration.  May involve work with or near chemicals including but not limited to airborne and/or skin exposure, high noise levels, confined spaces, and heights.

·         Ability to wear respirator in conditions of fumes, odors, dusts, mists, gases or poor ventilation.

·         Ability to ascend or descend ladders, scaffolding, stairs, ramps, and the like with agility.

·         Availability to work any shift, including weekends and holidays (shifts may be rotating). Mine operations are 24 hours per day, 7 days per week, 365 days per year).

·         Provide and maintain the minimum personal tools as described by the department tool list or be able to obtain them within 90 days of hire.

EDUCATION AND EXPERIENCE:

·         5 years related experience as an Industrial Support Equipment Mechanic and certification as a Journeymen Support Equipment Mechanic through a state approved apprenticeship program (or)

·         7 years related experience as an Industrial Support Equipment Mechanical experience and associates degree or Trade School Certification in a related field.

·         Must have high school diploma or GED.

·         English language fluency.

·         Air Conditioning Certification

The Ray mine is located 64 miles southeast of Phoenix and 70 miles northeast of Tucson.  We have a robust carpool / vanpool program and encourage employees to participate.  Employees save more than 50% of their commuting costs while reading, sleeping, or just enjoying the view.

A core value of ASARCO LLC is “Safety First.” The Company is committed to help employees continuously improve their efforts to work in the most safe, inclusive, socially and environmentally responsible manner practicable. Employee safety and health, both on and off the job, are critically important to the Company. Therefore, ASARCO LLC requires employees to have and effectively demonstrate good working knowledge of modern safety systems. Each employee will take prime responsibility for ensuring that s/he works within all required safety procedures and processes.

ASARCO LLC is an equal opportunity employer. Candidates must possess a current and valid driver’s license. Offers of employment are contingent upon a successful criminal background check and pre-employment physical including a drug screen.

ASARCO LLC offers an excellent low-cost benefits package for medical/prescription/ dental/vision, disability coverage, life insurance and other optional coverage and 401(k) plan with company match.