What are the responsibilities and job description for the Controls Technician position at HAYS?
Job Details
Controls Technician - Permanent - Sherman, TX - $100,000 - $105,000.
The final salary or hourly wage, as applicable, paid to each candidate/applicant for this position is ultimately dependent on a variety of factors, including, but not limited to, the candidate's/applicant's qualifications, skills, and level of experience as well as the geographical location of the position.
Applicants must be legally authorized to work in the United States. Visa sponsorship not available.
Our client is seeking a Controls Technician in Sherman, TX.
Role Description
The Controls Technician is responsible for providing routine and emergency maintenance on electrical, electronic and pneumatic equipment used to collect, process, transmit, receive and record data, and regulate the operation of the final control elements in wastewater treatment processes; Individual will also be responsible to perform periodic inspections, testing, adjustments, calibrations and servicing activities necessary to assure the proper operation of process instrumentation and control systems in the wastewater treatment process; participate in the performance of periodic plant operational integrity and safety tests to verify the proper operation of fire detectors, hazardous and explosive gas detectors, process alarm instrumentation, protective monitoring systems, and computerized control system fault detection.
Work in a safe manner that is in compliance with safety, environmental, and Facilities department policies and procedures.
Support all Environmental, Health, Safety & Security requirements, and programs
Responds to Facility Work Orders from building occupants.
Install, maintain, troubleshoot and repair: Electric, electronic, mechanical, and pneumatic instruments used to indicate, record, or control operations.
Perform acceptance tests of new equipment.
Industrial fixed, rotating, and electrical equipment such as pumps, piping, valves, motors, and fans.
Inspect the installation of equipment and systems for conformance with plans and specifications.
Perform original design work required to implement analog and digital system modifications
Prepare or modify existing operating and maintenance procedures.
Order supplies and prepare maintenance service reports
Use maintains, and repair electrical, electronic, hydraulic, and pneumatic test instruments.
Inspect, evaluate accuracy, and calibrate / tune, if necessary, transmitters, controllers and other instrumentation used in process control systems.
Perform specialized work related to control systems
Support complex troubleshooting of facilities equipment and associated failures
Partner with other Technicians and Management in identifying training requirements and safety procedures.
Partner with Engineers and Technicians on various facilities projects
Perform additional duties as assigned and assist other specialty areas as required.
Must be on-call and work off-hours when necessary to maintain efficient operation of facilities.
Consistently works on complex assignments with high degree of independence and initiative to resolve root cause.
Work from technical manuals, specifications, drawings, schematics, and verbal instruction.
Perform maintenance duties including maintaining Preventive Maintenance (PM) schedules, PM reports, troubleshooting reports and re-order, maintain and organize equipment spare parts.
Update PM documents as necessary.
Train personnel on equipment maintenance.
Skills & Requirements
High School or Graduate from a Technical/Associates Degree in a Science or Engineering discipline.
A minimum of five (5) years hands on work experience with the maintenance, calibration, and repairs of building automation systems. Must have the ability to troubleshoot systems to the board level and make required repairs up to and including system and panel level programming.
Thorough working knowledge of control systems and plant operations to effectively program and service building automation controls as well as adjust settings from a laptop or a work station.
Demonstrated knowledge of Semiconductor FAB systems and related equipment
Demonstrated ability to operate computer programs including Microsoft Office, Excel, CMMS etc.
Preventative maintenance software and automated building control systems knowledge a plus.
Demonstrated ability to follow detailed instructions and procedures to complete tasks and required documentation.
Demonstrated work performance in an environment requiring high level of attention to detail and timeliness.
Demonstrated ability to handle multiple tasks simultaneously and prioritize activities.
Demonstrated mechanical abilities with experience in maintenance and operation of equipment
Strong team player with ability to work well within a global team.
Benefits/Other Compensation:
Medical, Dental, Life Insurance, 401K.
Why Hays?
You will be working with a professional recruiter who has intimate knowledge of the industry and market trends. Your Hays recruiter will lead you through a thorough screening process in order to understand your skills, experience, needs, and drivers. You will also get support on resume writing, interview tips, and career planning, so when there's a position you really want, you're fully prepared to get it.
Nervous about an upcoming interview? Unsure how to write a new resume?
Visit the Hays Career Advice section to learn top tips to help you stand out from the crowd when job hunting.
Hays is committed to building a thriving culture of diversity that embraces people with different backgrounds, perspectives, and experiences. We believe that the more inclusive we are, the better we serve our candidates, clients, and employees. We are an equal employment opportunity employer, and we comply with all applicable laws prohibiting discrimination based on race, color, creed, sex (including pregnancy, sexual orientation, or gender identity), age, national origin or ancestry, physical or mental disability, veteran status, marital status, genetic information, HIV-positive status, as well as any other characteristic protected by federal, state, or local law. One of Hays' guiding principles is 'do the right thing'.
We also believe that actions speak louder than words.
In that regard, we train our staff on ensuring inclusivity throughout the entire recruitment process and counsel our clients on these principles. If you have any questions about Hays or any of our processes, please contact us.
In accordance with applicable federal, state, and local law protecting qualified individuals with known disabilities, Hays will attempt to reasonably accommodate those individuals unless doing so would create an undue hardship on the company. Any qualified applicant or consultant with a disability who requires an accommodation in order to perform the essential functions of the job should call or text .
Drug testing may be required; please contact a recruiter for more information.
#LI-DNI
The final salary or hourly wage, as applicable, paid to each candidate/applicant for this position is ultimately dependent on a variety of factors, including, but not limited to, the candidate's/applicant's qualifications, skills, and level of experience as well as the geographical location of the position.
Applicants must be legally authorized to work in the United States. Visa sponsorship not available.
Our client is seeking a Controls Technician in Sherman, TX.
Role Description
The Controls Technician is responsible for providing routine and emergency maintenance on electrical, electronic and pneumatic equipment used to collect, process, transmit, receive and record data, and regulate the operation of the final control elements in wastewater treatment processes; Individual will also be responsible to perform periodic inspections, testing, adjustments, calibrations and servicing activities necessary to assure the proper operation of process instrumentation and control systems in the wastewater treatment process; participate in the performance of periodic plant operational integrity and safety tests to verify the proper operation of fire detectors, hazardous and explosive gas detectors, process alarm instrumentation, protective monitoring systems, and computerized control system fault detection.
Work in a safe manner that is in compliance with safety, environmental, and Facilities department policies and procedures.
Support all Environmental, Health, Safety & Security requirements, and programs
Responds to Facility Work Orders from building occupants.
Install, maintain, troubleshoot and repair: Electric, electronic, mechanical, and pneumatic instruments used to indicate, record, or control operations.
Perform acceptance tests of new equipment.
Industrial fixed, rotating, and electrical equipment such as pumps, piping, valves, motors, and fans.
Inspect the installation of equipment and systems for conformance with plans and specifications.
Perform original design work required to implement analog and digital system modifications
Prepare or modify existing operating and maintenance procedures.
Order supplies and prepare maintenance service reports
Use maintains, and repair electrical, electronic, hydraulic, and pneumatic test instruments.
Inspect, evaluate accuracy, and calibrate / tune, if necessary, transmitters, controllers and other instrumentation used in process control systems.
Perform specialized work related to control systems
Support complex troubleshooting of facilities equipment and associated failures
Partner with other Technicians and Management in identifying training requirements and safety procedures.
Partner with Engineers and Technicians on various facilities projects
Perform additional duties as assigned and assist other specialty areas as required.
Must be on-call and work off-hours when necessary to maintain efficient operation of facilities.
Consistently works on complex assignments with high degree of independence and initiative to resolve root cause.
Work from technical manuals, specifications, drawings, schematics, and verbal instruction.
Perform maintenance duties including maintaining Preventive Maintenance (PM) schedules, PM reports, troubleshooting reports and re-order, maintain and organize equipment spare parts.
Update PM documents as necessary.
Train personnel on equipment maintenance.
Skills & Requirements
High School or Graduate from a Technical/Associates Degree in a Science or Engineering discipline.
A minimum of five (5) years hands on work experience with the maintenance, calibration, and repairs of building automation systems. Must have the ability to troubleshoot systems to the board level and make required repairs up to and including system and panel level programming.
Thorough working knowledge of control systems and plant operations to effectively program and service building automation controls as well as adjust settings from a laptop or a work station.
Demonstrated knowledge of Semiconductor FAB systems and related equipment
Demonstrated ability to operate computer programs including Microsoft Office, Excel, CMMS etc.
Preventative maintenance software and automated building control systems knowledge a plus.
Demonstrated ability to follow detailed instructions and procedures to complete tasks and required documentation.
Demonstrated work performance in an environment requiring high level of attention to detail and timeliness.
Demonstrated ability to handle multiple tasks simultaneously and prioritize activities.
Demonstrated mechanical abilities with experience in maintenance and operation of equipment
Strong team player with ability to work well within a global team.
Benefits/Other Compensation:
Medical, Dental, Life Insurance, 401K.
Why Hays?
You will be working with a professional recruiter who has intimate knowledge of the industry and market trends. Your Hays recruiter will lead you through a thorough screening process in order to understand your skills, experience, needs, and drivers. You will also get support on resume writing, interview tips, and career planning, so when there's a position you really want, you're fully prepared to get it.
Nervous about an upcoming interview? Unsure how to write a new resume?
Visit the Hays Career Advice section to learn top tips to help you stand out from the crowd when job hunting.
Hays is committed to building a thriving culture of diversity that embraces people with different backgrounds, perspectives, and experiences. We believe that the more inclusive we are, the better we serve our candidates, clients, and employees. We are an equal employment opportunity employer, and we comply with all applicable laws prohibiting discrimination based on race, color, creed, sex (including pregnancy, sexual orientation, or gender identity), age, national origin or ancestry, physical or mental disability, veteran status, marital status, genetic information, HIV-positive status, as well as any other characteristic protected by federal, state, or local law. One of Hays' guiding principles is 'do the right thing'.
We also believe that actions speak louder than words.
In that regard, we train our staff on ensuring inclusivity throughout the entire recruitment process and counsel our clients on these principles. If you have any questions about Hays or any of our processes, please contact us.
In accordance with applicable federal, state, and local law protecting qualified individuals with known disabilities, Hays will attempt to reasonably accommodate those individuals unless doing so would create an undue hardship on the company. Any qualified applicant or consultant with a disability who requires an accommodation in order to perform the essential functions of the job should call or text .
Drug testing may be required; please contact a recruiter for more information.
#LI-DNI
Employers have access to artificial intelligence language tools (“AI”) that help generate and enhance job descriptions and AI may have been used to create this description. The position description has been reviewed for accuracy and Dice believes it to correctly reflect the job opportunity.
Salary : $100,000 - $105,000
BAS Field Technician / Controls Specialist (BAS/DDC/BMS/UMCS/FRCS) - International / OCONUS (Job number: 1020)
Johnson Controls Federal Systems -
Houston, TX
Control Panel Wiring Technician
Drake Controls, LLC -
Houston, TX
Traveling Security Technician - Electronic / Integrated Security (Job number: 1168)
Johnson Controls Federal Systems -
Houston, TX
