Data Center Operating Engineer
Job Posting for Data Center Operating Engineer at JLL
JOB SUMMARY
A Data Center Operating Engineer will be responsible to assist in the hands-on maintenance of building systems for the safe, efficient, and proper operations of all assigned properties. Engineer will perform minor repairs and helps in the operation, monitoring, and performance of preventive maintenance on the building systems as necessary. The Operating Engineer must be a Member in Good Standing with the Local Union holding the Collective Bargaining Agreement for the site, or be willing to become a member of that Union upon acceptance by the Union.
QUALIFICATIONS - To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
EDUCATION/EXPERIENCE - A high school diploma or GED is required. A minimum four (4) years of relevant experience in the building maintenance industry and accredited trade school degree in HVAC, electronic, or other industry related trade. Union training and certification is also acceptable. Must have Universal CFC certification (or obtain within 90 days of employment). Should be knowledgeable in the safe and proper use of the following tools: ladders, lifts, basic hand tools, voltmeter, manual drain auger, plumbers helper, safety goggles, ear protection, and fire extinguisher.
COMMUNICATION & TECHNOLOGY SKILLS - Ability to read and interpret documents such as safety rules, operating and maintenanceinstructions, and procedure manuals. Have the ability to write routine reports and correspondence as well as follow detailed procedures and associated forms and data logging.Ability to use common technology, such as desktop PC, cellular phone, tablet/iPad, copier/scanner, and other electronic tools or devices as needed. Ability to use common software and applications, such as Microsoft Office products (especially Word, Outlook, and Excel) and CMMS system(s).
MATHEMATICAL SKILLS - Ability to calculate figures and amounts such as load balancing, proportions, percentages, area,circumference, and volume. Have the ability to apply concepts of basic algebra and geometry.
REASONING ABILITY - Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Have the ability to interpret a variety of instructions furnished in written,oral, diagram, or schedule format.
PHYSICAL DEMANDS- Physical demands described here are representative of those that must be met by an employeeto successfully perform the essential functions of this job. The employee frequently is required to
stand; walk; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The
employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25
pounds, and occasionally lift and/or move up to 50 pounds.
WORK ENVIRONMENT - The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to risk of electrical shock, moving mechanical parts and heights up to 30ft. The employee is occasionally exposed to wet and/or humid conditions as well as very cold and uncomfortable heat while inside and out of the facility. The noise level in the work environment is at times moderately loud.
ESSENTIAL DUTIES and RESPONSABILITIES includes but not limited to the following.
Perform the installation, maintenance, repair and operation of mechanical, electrical and power generation equipment and systems to support the critical environment.
Operate systems in a safe and efficient manner in accordance with government regulations, company policies and standard operating procedures.
Quickly learn building control, electrical and UPS systems, utilizing on the job training, operations manuals and documentation.
Perform predictive, planned, preventative and routine maintenance as well as equipment rounds, and service requests as directed. Perform maintenance in accordance with the JLL Preventative Maintenance Program. Assist with the development and improvement of preventative maintenance programs, schedules, work instructions, SOP's and operational procedures.
Inspect and repair pumps, fans, valves, and motors ensuring proper operation of the equipment and systems.
Perform visual and operational inspection of associated equipment and interpret specifications, blueprints and job standards to perform assigned duties.
Determine and/or assist with analyzing and resolving work problems and achieving work goals
Maintain time and production records and customer service requests.
Must be comfortable and flexible enough to work with a wide-ranging and changing scope of responsibilities while adhering to the constraints of procedures put in place to minimize the risk for human error.
Team player with the desire to foster teamwork to help create a positive working environment.
Perform maintenance and repairs to the Mechanical, Plumbing, Structural, Furniture, Fire, Life Safety, and Control systems for the facility to keep these systems up to applicable standards
Monitor operation and maintain refrigeration, water cooling and air conditioning equipment, boilers, heating, ventilating and hot water equipment, pumps, valves, piping and filters, other mechanical and electrical equipment
Perform and/or complete all tenant service requests accurately and expediently.
Complies with all policies and procedures established for the building, including safe storage, usage, and disposal of hazardous materials while maintaining a clean and safe workplace
Periodically acts as the on-call engineer as requested by supervisor.
Actively participate in emergency response procedures, technical and safety training programs.
Perform all work using the proper safety equipment and in a safe manner.
JLL Is an Equal Opportunity Employer JLL is committed to developing and maintaining a diverse workforce. JLL strongly believes in equal opportunity extended to all individuals in all aspects of the employment relationship, including recruitment, hiring, training, promotion, transfer, discipline, layoff, recall and termination without regard to race, color, religion, belief, creed, age, sex, pregnancy or maternity (including childbirth and related conditions), family responsibility (e.g. child care, elder care), nationality, ethnic or national origin or ancestry, citizenship, marital status, civil partner status, sexual orientation, gender identity or expression, transgender status, veteran’s status, genetic information, trade union membership, social position, political view or status as a qualified individual with a disability, protected leave status or any other protected characteristic in accordance with applicable law. The company also endeavors to make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodations would impose an undue hardship on the operation of our business and ensures that employment decisions are based only on valid job requirements.
A Data Center Operating Engineer will be responsible to assist in the hands-on maintenance of building systems for the safe, efficient, and proper operations of all assigned properties. Engineer will perform minor repairs and helps in the operation, monitoring, and performance of preventive maintenance on the building systems as necessary. The Operating Engineer must be a Member in Good Standing with the Local Union holding the Collective Bargaining Agreement for the site, or be willing to become a member of that Union upon acceptance by the Union.
QUALIFICATIONS - To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
EDUCATION/EXPERIENCE - A high school diploma or GED is required. A minimum four (4) years of relevant experience in the building maintenance industry and accredited trade school degree in HVAC, electronic, or other industry related trade. Union training and certification is also acceptable. Must have Universal CFC certification (or obtain within 90 days of employment). Should be knowledgeable in the safe and proper use of the following tools: ladders, lifts, basic hand tools, voltmeter, manual drain auger, plumbers helper, safety goggles, ear protection, and fire extinguisher.
COMMUNICATION & TECHNOLOGY SKILLS - Ability to read and interpret documents such as safety rules, operating and maintenanceinstructions, and procedure manuals. Have the ability to write routine reports and correspondence as well as follow detailed procedures and associated forms and data logging.Ability to use common technology, such as desktop PC, cellular phone, tablet/iPad, copier/scanner, and other electronic tools or devices as needed. Ability to use common software and applications, such as Microsoft Office products (especially Word, Outlook, and Excel) and CMMS system(s).
MATHEMATICAL SKILLS - Ability to calculate figures and amounts such as load balancing, proportions, percentages, area,circumference, and volume. Have the ability to apply concepts of basic algebra and geometry.
REASONING ABILITY - Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Have the ability to interpret a variety of instructions furnished in written,oral, diagram, or schedule format.
PHYSICAL DEMANDS- Physical demands described here are representative of those that must be met by an employeeto successfully perform the essential functions of this job. The employee frequently is required to
stand; walk; reach with hands and arms; climb or balance; and stoop, kneel, crouch, or crawl. The
employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25
pounds, and occasionally lift and/or move up to 50 pounds.
WORK ENVIRONMENT - The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to risk of electrical shock, moving mechanical parts and heights up to 30ft. The employee is occasionally exposed to wet and/or humid conditions as well as very cold and uncomfortable heat while inside and out of the facility. The noise level in the work environment is at times moderately loud.
ESSENTIAL DUTIES and RESPONSABILITIES includes but not limited to the following.
Perform the installation, maintenance, repair and operation of mechanical, electrical and power generation equipment and systems to support the critical environment.
Operate systems in a safe and efficient manner in accordance with government regulations, company policies and standard operating procedures.
Quickly learn building control, electrical and UPS systems, utilizing on the job training, operations manuals and documentation.
Perform predictive, planned, preventative and routine maintenance as well as equipment rounds, and service requests as directed. Perform maintenance in accordance with the JLL Preventative Maintenance Program. Assist with the development and improvement of preventative maintenance programs, schedules, work instructions, SOP's and operational procedures.
Inspect and repair pumps, fans, valves, and motors ensuring proper operation of the equipment and systems.
Perform visual and operational inspection of associated equipment and interpret specifications, blueprints and job standards to perform assigned duties.
Determine and/or assist with analyzing and resolving work problems and achieving work goals
Maintain time and production records and customer service requests.
Must be comfortable and flexible enough to work with a wide-ranging and changing scope of responsibilities while adhering to the constraints of procedures put in place to minimize the risk for human error.
Team player with the desire to foster teamwork to help create a positive working environment.
Perform maintenance and repairs to the Mechanical, Plumbing, Structural, Furniture, Fire, Life Safety, and Control systems for the facility to keep these systems up to applicable standards
Monitor operation and maintain refrigeration, water cooling and air conditioning equipment, boilers, heating, ventilating and hot water equipment, pumps, valves, piping and filters, other mechanical and electrical equipment
Perform and/or complete all tenant service requests accurately and expediently.
Complies with all policies and procedures established for the building, including safe storage, usage, and disposal of hazardous materials while maintaining a clean and safe workplace
Periodically acts as the on-call engineer as requested by supervisor.
Actively participate in emergency response procedures, technical and safety training programs.
Perform all work using the proper safety equipment and in a safe manner.
JLL Is an Equal Opportunity Employer JLL is committed to developing and maintaining a diverse workforce. JLL strongly believes in equal opportunity extended to all individuals in all aspects of the employment relationship, including recruitment, hiring, training, promotion, transfer, discipline, layoff, recall and termination without regard to race, color, religion, belief, creed, age, sex, pregnancy or maternity (including childbirth and related conditions), family responsibility (e.g. child care, elder care), nationality, ethnic or national origin or ancestry, citizenship, marital status, civil partner status, sexual orientation, gender identity or expression, transgender status, veteran’s status, genetic information, trade union membership, social position, political view or status as a qualified individual with a disability, protected leave status or any other protected characteristic in accordance with applicable law. The company also endeavors to make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodations would impose an undue hardship on the operation of our business and ensures that employment decisions are based only on valid job requirements.
Operating Engineer
JLL -
Wilmington, DE
Operating Engineer
JLL -
Newark, DE
Data Engineer
Motion Recruitment Partners, LLC -
Castle, DE
Salary.com Estimation for Data Center Operating Engineer in Wilmington, DE
$50,423 to $63,957
If your compensation planning software is too rigid to deploy winning incentive strategies, it’s time to find an adaptable solution.
Compensation Planning
Enhance your organization's compensation strategy with salary data sets that HR and team managers can use to pay your staff right.
Surveys & Data Sets
Sign up to receive alerts about other jobs with skills like those required for the Data Center Operating Engineer.
Click the checkbox next to the jobs that you are interested in.
-
Carpentry Skill
-
Income Estimation: $40,540 - $55,341
-
Income Estimation: $41,193 - $51,219
-
-
Facility Maintenance & Coordination Skill
-
Income Estimation: $40,540 - $55,341
-
Income Estimation: $47,055 - $68,103
-
This job has expired.
View Core, Job Family, and Industry Job Skills and Competency Data for more than 15,000 Job Titles
Skills Library
Job openings at JLL
JLL
Cheyenne, WY
Full Time
JLL
Cheyenne, WY
Full Time
JLL
Washington, DC
Full Time
JLL
Washington, DC
Full Time
Not the job you're looking for? Here are some other Data Center Operating Engineer jobs in the Wilmington, DE area that may be a better fit.
We don't have any other Data Center Operating Engineer jobs in the Wilmington, DE area right now.
Senior Network Engineer - Data Center
B10 Wells Fargo Bank, N. A., Westlake, TX
JLL, Bear, DE