General Maintenance Technician
Job Posting for General Maintenance Technician at JLL
Job Description
Essential Functions:
Should be well versed in air handling equipment /air filters including DP monitoring and air balancing, refrigeration systems (specialty multi circuit systems), DX systems, and process chillers / comfort chillers.
Manage refrigerants in compliance with NJ and EPA requirements, including maintaining accurate refrigerant usage and inventory records.
Monitor the operation and make necessary adjustments on heat exchangers, HVAC systems, Centrifugal Chillers, Cooling towers, VAV systems, electrical, emergency backup systems, and hot water systems.
Monitor operation, adjust, and maintain refrigeration, chilled water, and air conditioning equipment.
Monitor and repair boilers, and ventilating and hot water heaters; pumps, valves, piping and filters.
Monitor and repair other mechanical and electrical equipment; record readings and adjust where necessary to assure proper operation of equipment. Requires the ability to analyze the operation of various systems, determine the cause of any problems/malfunctions and take corrective action, as required.
Install and repair plumbing / piping / tubing; wire single and three phase motors; run conduit; pull wiring to machinery, motors, operating parts, etc.; install and rebuild pumps and motors; install and rebuild air compressors; heat exchangers; replace bearings in all types of motors; replace seals on pumps; install and repair piping, valves, filters, hot water systems and associated controls; assist other mechanics and operators with major repairs and maintenance of building and equipment. Install, repair, and maintain electrical controls, switching and motor controls.
Troubleshoot and PM VFD (variable frequency drives) on HVAC units and pumps
Perform routine facility repairs, including sheetrock, patching, caulking, painting, lock repair, and piping
Must be capable of identifying, utilizing, and operating tools and equipment associated with craft discipline
Must demonstrate the ability to comprehend and recognize all job-related work permits and complete Job Safety Analysis
Must be able to perform work wearing personnel protective equipment. Including but not limited to the following: rain gear, chemical protective clothing, supplied air and air purifying respirators, safety harness, flame retardant coveralls, flash suit with gloves and hood, hard hat, ear plugs, and safety glasses
Should be able to estimate costs and order materials
Must be qualified to operate a man lift, scissor lift, forklift and respirator fitted
Must be able to work in high places (not afraid of heights) and work in confined spaces
Must be able to work off lifts and scaffolds and understand elevated work standards
Comply with policies for the safe storage, usage, and disposal of hazardous materials
Maintain compliance to State, County, or City Ordinances, Codes, or Laws
Document work performance and materials procurement, as directed
All other duties assigned
Required Knowledge, Skills and Abilities
Mon-Fri Day Shift. Must be available for on-call work. Off-hours shifts, evening, night and weekend work may be required.
High school diploma or state equivalent required
Trade license, apprenticeship/or equivalent trade experience vocational certification preferred
Experience - 5 years of experience in a FDA regulated and research environment preferred
Experience with Siemens or Honeywell BAS systems preferred
Universal certification (Refrigeration) required
High Pressure Black seal or higher Boiler License preferred.
Must have adequate skills to perform required job functions with minimal supervision
Able to work in a customer service environment interacting with the client.
Team player with good interpersonal skills
Fluent in English. Conflict resolution skills. Ability to communicate well in both oral and written reports
Proficient with computer-based systems and programs, including Microsoft Office and Outlook.
Must be able to adequately perform required job functions. This includes being able to lift, bend, and move in such a way as to perform job tasks in a safe and approved manner. Must be able to lift 50lbs.
Overhead work / working at heights required.
Skilled and physically able to operate electric hand tools, work on a ladder, carry tools, lift, and carry heavy loads, operate required equipment, and operate a motor vehicle
Able to work in close places such as closets, crawl spaces, attics, vaults, etc.
Required to work in all weather conditions
Environmental conditions will vary based on the job being performed. Must be capable of working outdoors in all types of weather conditions.
JLL Is an Equal Opportunity Employer JLL is committed to developing and maintaining a diverse workforce. JLL strongly believes in equal opportunity extended to all individuals in all aspects of the employment relationship, including recruitment, hiring, training, promotion, transfer, discipline, layoff, recall and termination without regard to race, color, religion, belief, creed, age, sex, pregnancy or maternity (including childbirth and related conditions), family responsibility (e.g. child care, elder care), nationality, ethnic or national origin or ancestry, citizenship, marital status, civil partner status, sexual orientation, gender identity or expression, transgender status, veteran’s status, genetic information, trade union membership, social position, political view or status as a qualified individual with a disability, protected leave status or any other protected characteristic in accordance with applicable law. The company also endeavors to make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodations would impose an undue hardship on the operation of our business and ensures that employment decisions are based only on valid job requirements.
Essential Functions:
Should be well versed in air handling equipment /air filters including DP monitoring and air balancing, refrigeration systems (specialty multi circuit systems), DX systems, and process chillers / comfort chillers.
Manage refrigerants in compliance with NJ and EPA requirements, including maintaining accurate refrigerant usage and inventory records.
Monitor the operation and make necessary adjustments on heat exchangers, HVAC systems, Centrifugal Chillers, Cooling towers, VAV systems, electrical, emergency backup systems, and hot water systems.
Monitor operation, adjust, and maintain refrigeration, chilled water, and air conditioning equipment.
Monitor and repair boilers, and ventilating and hot water heaters; pumps, valves, piping and filters.
Monitor and repair other mechanical and electrical equipment; record readings and adjust where necessary to assure proper operation of equipment. Requires the ability to analyze the operation of various systems, determine the cause of any problems/malfunctions and take corrective action, as required.
Install and repair plumbing / piping / tubing; wire single and three phase motors; run conduit; pull wiring to machinery, motors, operating parts, etc.; install and rebuild pumps and motors; install and rebuild air compressors; heat exchangers; replace bearings in all types of motors; replace seals on pumps; install and repair piping, valves, filters, hot water systems and associated controls; assist other mechanics and operators with major repairs and maintenance of building and equipment. Install, repair, and maintain electrical controls, switching and motor controls.
Troubleshoot and PM VFD (variable frequency drives) on HVAC units and pumps
Perform routine facility repairs, including sheetrock, patching, caulking, painting, lock repair, and piping
Must be capable of identifying, utilizing, and operating tools and equipment associated with craft discipline
Must demonstrate the ability to comprehend and recognize all job-related work permits and complete Job Safety Analysis
Must be able to perform work wearing personnel protective equipment. Including but not limited to the following: rain gear, chemical protective clothing, supplied air and air purifying respirators, safety harness, flame retardant coveralls, flash suit with gloves and hood, hard hat, ear plugs, and safety glasses
Should be able to estimate costs and order materials
Must be qualified to operate a man lift, scissor lift, forklift and respirator fitted
Must be able to work in high places (not afraid of heights) and work in confined spaces
Must be able to work off lifts and scaffolds and understand elevated work standards
Comply with policies for the safe storage, usage, and disposal of hazardous materials
Maintain compliance to State, County, or City Ordinances, Codes, or Laws
Document work performance and materials procurement, as directed
All other duties assigned
Required Knowledge, Skills and Abilities
Mon-Fri Day Shift. Must be available for on-call work. Off-hours shifts, evening, night and weekend work may be required.
High school diploma or state equivalent required
Trade license, apprenticeship/or equivalent trade experience vocational certification preferred
Experience - 5 years of experience in a FDA regulated and research environment preferred
Experience with Siemens or Honeywell BAS systems preferred
Universal certification (Refrigeration) required
High Pressure Black seal or higher Boiler License preferred.
Must have adequate skills to perform required job functions with minimal supervision
Able to work in a customer service environment interacting with the client.
Team player with good interpersonal skills
Fluent in English. Conflict resolution skills. Ability to communicate well in both oral and written reports
Proficient with computer-based systems and programs, including Microsoft Office and Outlook.
Must be able to adequately perform required job functions. This includes being able to lift, bend, and move in such a way as to perform job tasks in a safe and approved manner. Must be able to lift 50lbs.
Overhead work / working at heights required.
Skilled and physically able to operate electric hand tools, work on a ladder, carry tools, lift, and carry heavy loads, operate required equipment, and operate a motor vehicle
Able to work in close places such as closets, crawl spaces, attics, vaults, etc.
Required to work in all weather conditions
Environmental conditions will vary based on the job being performed. Must be capable of working outdoors in all types of weather conditions.
JLL Is an Equal Opportunity Employer JLL is committed to developing and maintaining a diverse workforce. JLL strongly believes in equal opportunity extended to all individuals in all aspects of the employment relationship, including recruitment, hiring, training, promotion, transfer, discipline, layoff, recall and termination without regard to race, color, religion, belief, creed, age, sex, pregnancy or maternity (including childbirth and related conditions), family responsibility (e.g. child care, elder care), nationality, ethnic or national origin or ancestry, citizenship, marital status, civil partner status, sexual orientation, gender identity or expression, transgender status, veteran’s status, genetic information, trade union membership, social position, political view or status as a qualified individual with a disability, protected leave status or any other protected characteristic in accordance with applicable law. The company also endeavors to make reasonable accommodations for known physical or mental limitations of otherwise qualified employees and applicants with disabilities unless the accommodations would impose an undue hardship on the operation of our business and ensures that employment decisions are based only on valid job requirements.
Salary.com Estimation for General Maintenance Technician in Pennington, NJ
$61,652 to $81,925
If your compensation planning software is too rigid to deploy winning incentive strategies, it’s time to find an adaptable solution.
Compensation Planning
Enhance your organization's compensation strategy with salary data sets that HR and team managers can use to pay your staff right.
Surveys & Data Sets
Sign up to receive alerts about other jobs that are on the General Maintenance Technician career path.
Click the checkbox next to the jobs that you are interested in.
Sign up to receive alerts about other jobs with skills like those required for the General Maintenance Technician.
Click the checkbox next to the jobs that you are interested in.
-
Carpentry Skill
-
Income Estimation: $47,493 - $60,047
-
Income Estimation: $52,968 - $71,410
-
-
Corrective Maintenance Skill
-
Income Estimation: $40,945 - $68,338
-
Income Estimation: $44,479 - $67,054
-
View Core, Job Family, and Industry Job Skills and Competency Data for more than 15,000 Job Titles
Skills Library
Job openings at JLL
JLL
Washington, DC
Full Time
JLL
Port Allen, LA
Full Time
JLL
North Haven, CT
Full Time
JLL
Bondurant, IA
Full Time
Not the job you're looking for? Here are some other General Maintenance Technician jobs in the Pennington, NJ area that may be a better fit.
We don't have any other General Maintenance Technician jobs in the Pennington, NJ area right now.
Landscape / Lawn Spray Technician
Red Oak Landscaping and Lawn Maintenance, Morrisville, PA
Redner's Markets, Levittown, PA