NDE Level ll

General Description:
The NDE Leve II position is responsible for performing the hands-on NDT inspections, interfacing with the onsite client, and preliminary evaluations of inspected items. This individual reports directly to the Inspection Foreman.

This position will be responsible for driving CCI's Mission, Vision, and Values, a crucial part of the strategic plan to drive success. CCI Industrial Services leads the industry in Safety, Innovation, and Excellence. CCI's mission is to provide quality-driven, cost-effective construction, maintenance, industrial cleaning, power generation, and transportation services to support resource development companies.

Essential Duties & Job Functions:
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• Ensure a safe work environment.

• Demonstrate and ensure an overall commitment to Safety and Quality.
• Maintain required NDT level 2 certifications in accordance with ASNT SNT-TC-1A and contractors NDE program.
• An NDT Level II individual shall be qualified to set up and calibrate equipment for task at hand.
• Interpret and evaluate results with respect to applicable codes, standards, specifications, procedures, and customer's specific requests.
• Properly perform specific calibrations, specific NDE, and specific evaluations for acceptance or rejection determinations according to written instructions and to record accurate results.
• Perform NDT Inspections on various piping, tanks, pressure vessels and components.
• Perform inspections and reporting in accordance with Inspection guidelines.
• Maintain thorough and accurate documentation analysis from inspections performed.
• Walk, climb and maneuver on or around piping, piping supports while working in a crouched position.
• Carry and effectively manipulate a 16-foot ladder.
• As required by various jobs and clients:
• Read isometric drawings.
• Execute safety and permitting requirements.
• Perform routine maintenance and repair equipment.
• Operate vehicles and equipment (with certification or license)
• Responsible for proper transportation, control, and disposal of hazardous materials in technicians' control
• Direct, instruct, and be a positive role model to the Level l or Trainee that is accompanying them on the job.
• Must be able to work in a team environment.
• Demonstrate and ensure overall commitment to Safety.

• Other duties as assigned.

Knowledge, Skills, and Abilities:

• Ability to lead and mentor an inspection crew.
• Ability to climb stairs/scaffolding/ladder while holding handrail with opposite hand.
• Knowledge of various applications of NDT techniques and methods used to collect inspection data utilized in support of integrity management programs.

Work Environment:
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• While performing the duties of this job, the employee regularly works at the construction site. The employee may be exposed to moving mechanical parts; high precarious places; fumes or airborne particles; outside weather conditions and risk of electrical shock. The noise in these work environments is usually moderate to very loud.
• Position may be working with potentially hazardous materials and wastes.

• The employee is occasionally exposed to fumes or airborne particles in a mechanical shop environment. The noise level in the work environment is usually moderate. Hearing protection and the use of safety eyewear is required in most working situations.

• Climb stairs, ladders and/or scaffolding up to 100 feet multiple times per day, utilizing three points of contacts. May work in a crouched position for extended periods of time. Work extended hours in hot humid temperatures.

• Daily overtime will be required.

Physical Requirements:
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. A pre-hire post offer Functional Capacity Evaluation (FCE) will be conducted to determine an employee's ability to perform to the job standard. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.

• MOBILITY: Must be able to access all controls and all parts of machinery for service. Must be able to push/pull 50 pounds for 20 feet.
• HEARING: Must be able to hear audible safety alarms.
• VISUAL ACUITY: Must be adequate to perform above listed tasks in a safe manner and take hand signals from ground man or flag man.
• LIFTING: Must be able to routinely lift up to 65 pounds from floor to waist, 65 pounds from wait level to shoulder height and carry 65 pounds for 20 feet.
• RANGE OF MOTION: An objective range of motion measurement will be conducted and recorded using a five position and rapid exchange grip strength test during the pre-hire/post offer FCE.

Required Qualifications:

• ASNT Level 2 certification for UT
• ASNT Level 2 Certification for PT
• ASNT Level 2 Certification for MT
• Two years' experience utilizing real time radiography for the detection of CUI
• Two years' experience interpreting real time images for CUI interpretation
• High School Diploma or GED
• Valid driver's license with no restrictions
• Pass a Background Check and Drug Screen

Preferred Qualifications:

• API 570 Certification is preferred.
• ASNT Level 2 certification for VT
• ASNT Level 2 certification for RT
• Current IRRSP or State Radiographers Certification
• Digital Radiography certification utilizing flat panel technology is preferred.
• Current IRATA Level 1 or higher certification is preferred.
• Experience utilizing the following equipment is preferred:

• QSA/Envision C-arm
• Teledyne C-View
• QSA Snapshot
• SAIC RTR4
• Automated crawlers utilizing pneumatic gamma sources

Job Type: Full-time

Work Location: Multiple Locations