What are the responsibilities and job description for the Implementation Specialist (SDWAN) position at Tanisha Systems, Inc.?
Job Description
Job Title: Implementation Specialist (SDWAN)
Location: Edison, NJ/ Santa Clara, CA Onsite
Job Description:-
Open for Travel
1. Physical installation of each in accordance with specific Customer environmental needs to ensure that the device is ready for implementation in the Customers IP network environment.
2. Firmware upgrades to vendor recommended version(s), as needed
3. Configuration of the management interface, as needed
4. Perform the installation tasks.
5. Unpack and inspect all hardware prior to installation.
6. Mount any necessary rack related hardware.
7. Mount the switch into the rack.
8. Install and route power cables.
9. Label and connect network cable to switch management port.
10. Install all optional cards/modules into the switch.
11. Power on equipment and check for hardware fault indicators.
12. Update switch operating system, as needed.
13. Configure remote access for the switch, as needed
14. For managed switches only, assign an IP address, mask and gateway information to the management port of the switch.
15. Verify if remote access if working for the designated IP address.
16. Do steps 1 to 11 for the Networking Firewall
17. Configure firewall management - plan, execute the firewall initial wizard and assign an IP address, netmask, gateway, username and password.
18. Using a customer provided cable, connect switch management port to a client in order
to demonstrate management port functionality (i.e: ping tests, mgmt connectivity, etc)
Thanks & Regards
Aman Kundu
Team Lead
Tanisha Systems Inc
Desk no. Ext 454 Direct:
Email:
Sr. Technical Recruiter
Tanisha Systems Inc
