Quality Inspector 2 - Swing Shift

Description

Vision Plastics, Inc., the Northwest leader in custom injection molding, is accepting resumes for experienced in-process inspectors. Do you have experience with in-process inspection in a manufacturing environment? Do you thrive in an office and fast-paced manufacturing setting? If so, apply today!

Inspect parts from manufacturing to help assure quality of products.

ESSENTIAL FUNCTIONS

1. Perform basic visual and dimensional inspection functions on manufactured parts per inspection procedure instructions.
2. Record inspection data as required.
3. Recognize and communicate out of control and out of specification conditions to Manufacturing per designated procedures. Write Cause and Effect Reports (C&E’s), as needed.
4. Write Non-Conformance Reports (NCR’s) as designated by procedures.
5. Provide unit samples and other pertinent quality criteria or other information at start up.
6. File all necessary items in their proper place.
7. Assist manufacturing whenever possible with acceptable criteria, problem investigation and procedure interpretations.
8. Recognize and communicate changes to part quality that may need the attention of technical staff per inspection procedures.
9. Send reports via email to appropriate staff, as assigned and needed.
10. Perform the above duties with the assistance of an Inspector 3 or Inspector 4 when presented with an unfamiliar part, procedure or measuring method.\
11. Release product using a scanner in the MRP system.
12. Provide assistance to other staff as needed to clarify procedures, acceptance criteria and measuring methods.
13. Provides samples with tags for the operator, when needed.
14. Ensures documentation is correct for quality and production.

SECONDARY FUNCTIONS

1. Applies 5S to keep area neat and clean for next shift.
2. Assist with rework as needed.
3. Assist in training of new inspectors, as assigned
4. Other duties as assigned.

Requirements

1. Must be able to read, understand and verbally communicate work instructions.
2. Must be able to perform basic math functions (addition, subtraction, multiplication, and division).
3. Must be able to lift, reach and pull 10 lbs. frequently and 30 lbs. occasionally.
4. Must have working knowledge of plastics terminology and be able to interpret part specifications as related to the position.
5. Must have basic reading, writing, math, and computer skills.
6. Must be capable of using basic inspection tools and gauges accurately.
7. Must have good communication and problem solving skills.
8. Must have at least 6 months experience as an Inspector 1 or similar experience and has a basic understanding of incoming inspection procedures.

*EEO Employer*

*Medical, dental, vision, flex spending, 401k, STD, LTD, and a community garden*

Salary : $21 - $24