Electronic Engineer Salary at Behrad BETA

How much does a Behrad Electronic Engineer make?

As of May 2025, the average annual salary for an Electronic Engineer at Behrad is $77,319, which translates to approximately $37 per hour. Salaries for Electronic Engineer at Behrad typically range from $69,818 to $84,643, reflecting the diverse roles within the company.

It's essential to understand that salaries can vary significantly based on factors such as geographic location, departmental budget, and individual qualifications. Key determinants include years of experience, specific skill sets, educational background, and relevant certifications. For a more tailored salary estimate, consider these variables when evaluating compensation for this role.

DISCLAIMER: The salary range presented here is an estimation that has been derived from our proprietary algorithm. It should be noted that this range does not originate from the company's factual payroll records or survey data.

Website:
behrad.org
Size:
<25 Employees
Revenue:
<$5M
Industry:
Edu., Gov't. & Nonprofit

Behrad is a company that operates in the Nonprofit Organizations industry. It employs 6-10 people and has $1M-$5M of revenue. The company is headquartered in New York City, New York.

See similar companies related to Behrad

What Skills Does a person Need at Behrad?

At Behrad, specify the abilities and skills that a person needs in order to carry out the specified job duties. Each competency has five to ten behavioral assertions that can be observed, each with a corresponding performance level (from one to five) that is required for a particular job.

  1. Troubleshooting: Troubleshooting is a form of problem solving, often applied to repair failed products or processes on a machine or a system. It is a logical, systematic search for the source of a problem in order to solve it, and make the product or process operational again. Troubleshooting is needed to identify the symptoms. Determining the most likely cause is a process of elimination—eliminating potential causes of a problem. Finally, troubleshooting requires confirmation that the solution restores the product or process to its working state. In general, troubleshooting is the identification or diagnosis of "trouble" in the management flow of a system caused by a failure of some kind. The problem is initially described as symptoms of malfunction, and troubleshooting is the process of determining and remedying the causes of these symptoms. A system can be described in terms of its expected, desired or intended behavior (usually, for artificial systems, its purpose). Events or inputs to the system are expected to generate specific results or outputs. (For example, selecting the "print" option from various computer applications is intended to result in a hardcopy emerging from some specific device). Any unexpected or undesirable behavior is a symptom. Troubleshooting is the process of isolating the specific cause or causes of the symptom. Frequently the symptom is a failure of the product or process to produce any results. (Nothing was printed, for example). Corrective action can then be taken to prevent further failures of a similar kind.
  2. Schematic: A schematic, or schematic diagram, is a representation of the elements of a system using abstract, graphic symbols rather than realistic pictures.
  3. Installation: The action or process of installing someone or something, or of being installed. the act of installing the state of being installed, something that is installed for use.
  4. Soldering: Soldering (AmE: /ˈsɒdərɪŋ/, BrE: /ˈsoʊldərɪŋ/) is a process in which two or more items are joined together by melting and putting a filler metal (solder) into the joint, the filler metal having a lower melting point than the adjoining metal. Unlike welding, soldering does not involve melting the work pieces. In brazing, the work piece metal also does not melt, but the filler metal is one that melts at a higher temperature than in soldering. In the past, nearly all solders contained lead, but environmental and health concerns have increasingly dictated use of lead-free alloys for electronics and plumbing purposes.
  5. Analysis: Analysis is the process of considering something carefully or using statistical methods in order to understand it or explain it.

Related Jobs

Keybotic
Barcelona , Catalonia

Electronics Hardware Engineer About Keybotic Keybotic is a cutting-edge robotics startup that designs and manufactures Keyper, an autonomous robot dog for industrial inspections. With our 1st prize DARPA award-winning technology (US Government), Keyper inspects and maps without any human interaction. Keybotic is a fast-growing tech company that is shaping the future of mobile robotics across multiple industries such as chemical, security, oil&gas, energy, among others. We’re seeking a talented and highly motivated Electronics engineer to design electronics systems (SCH&PCBs) as of February at our offices in Barcelona. This is a full-time job with an indefinite contract. Do you want to make the world a risk-free place with our robots? Do you want to learn and work in the robotics world? Join Keybotic. Your Role and Responsibilities: Specification definition Schematics design PCB layout design Test definition and execution System Design General electronics and electrical troubleshooting


Sponsored
5/3/2025 12:00:00 AM
Leidos
Jamaica , NY

Description Leidos is seeking an Electronics Engineer to join the National Airspace System Integration Support Contract (NISC IV) team. This role can be located in the College Park, GA area OR the Jamaica NY area. Includes up to 25% travel. In this role you will support the Federal Aviation Administration's (FAA) Eastern Service Area (ESA) performing electronics design engineering, cost estimating, scheduling, coordinating, inspecting, and acceptance and reporting project progress and issues against project goals, scope of work, and schedule. The projects support air traffic control facilities over the geographic scope of the ESA. Electronics Engineer Primary Responsibilities Plan and design a variety of facility establishment, replacement and modernization projects (e.g. data networking, air/ground communications, fiber optic data transmission, communications control, inter-facility wiring) Perform on-site surveys to develop designs and detailed reports Prepare unit installation and s


Sponsored
5/1/2025 12:00:00 AM
Leidos
Jamaica , NY

Description Leidos is seeking a Senior Electronics Engineer to join the National Airspace System Integration Support Contract (NISC IV) team. In this role you will support the Federal Aviation Administration's (FAA) Eastern Service Area (ESA) supporting the implementation of critical power systems in air traffic control facilities over the geographic scope of the ESA. This role can be located in the College Park, GA area OR the Jamaica NY area. Includes up to 25% travel. Electronics Engineer Primary Responsibilities: Perform site surveys to analyze equipment load distribution within the facility and recommend changes to separate circuits to increase systems availability Provide this data and recommendations to electrical design engineers and work with them to resolve issues Work with the design team to help create phasing plans for project implementation to mitigate impact to the facility Discuss phasing plans with local TechOps and Air Traffic personnel to foster understanding and add


Sponsored
5/1/2025 12:00:00 AM
Leidos
College Park , GA

Description Leidos is seeking an Electronics Engineer to join the National Airspace System Integration Support Contract (NISC IV) team. This role can be located in the College Park, GA area OR the Jamaica NY area. Includes up to 25% travel. In this role you will support the Federal Aviation Administration's (FAA) Eastern Service Area (ESA) performing electronics design engineering, cost estimating, scheduling, coordinating, inspecting, and acceptance and reporting project progress and issues against project goals, scope of work, and schedule. The projects support air traffic control facilities over the geographic scope of the ESA. Electronics Engineer Primary Responsibilities Plan and design a variety of facility establishment, replacement and modernization projects (e.g. data networking, air/ground communications, fiber optic data transmission, communications control, inter-facility wiring) Perform on-site surveys to develop designs and detailed reports Prepare unit installation and s


Sponsored
5/1/2025 12:00:00 AM
Leidos
College Park , GA

Description Leidos is seeking a Senior Electronics Engineer to join the National Airspace System Integration Support Contract (NISC IV) team. In this role you will support the Federal Aviation Administration's (FAA) Eastern Service Area (ESA) supporting the implementation of critical power systems in air traffic control facilities over the geographic scope of the ESA. This role can be located in the College Park, GA area OR the Jamaica NY area. Includes up to 25% travel. Electronics Engineer Primary Responsibilities: Perform site surveys to analyze equipment load distribution within the facility and recommend changes to separate circuits to increase systems availability Provide this data and recommendations to electrical design engineers and work with them to resolve issues Work with the design team to help create phasing plans for project implementation to mitigate impact to the facility Discuss phasing plans with local TechOps and Air Traffic personnel to foster understanding and add


Sponsored
5/1/2025 12:00:00 AM
Bonneville Power Administration
Spokane , WA

Summary This position is located with Bonneville Power Administration in Control Center Communication Operations (JTO), Controls & Communications (JT), Information Technology (J). A successful candidate in the Electronics Engineer position will serve as a subject matter expert (SME) on operation and maintenance for a range of equipment and systems that are part of BPA's telecommunication system. Responsibilities As an Electronics Engineer, you will: Conduct engineering analysis of various alternatives/conflicting issues to meet operational and maintenance objectives. Create policies, procedures, standards, and plans for new technology based on operational equipment. Represent the organization in conferences, meetings, hearings, or presentations involving problems or issues of considerable consequence or importance to regional and national efforts. Serve as a technical authority concerning the integration of new or replacement equipment in a telecommunications system. Monitors the opera


Sponsored
4/30/2025 12:00:00 AM
Leidos
Jacksonville , FL

Description Leidos, under the NISC IV program, is seeking experienced candidates for the role of Electronics Engineer to provide support for the Federal Aviation Administration’s (FAA) Telecommunications modernization projects. This position, located in Jacksonville, FL, will support Engineering Services in general implementation planning and operational integration involving National Airspace System (NAS) modernization by providing planning, organizing, and executing methodologies required to modernize the FAA’s Telecommunications systems. Electronics Engineer Job Duties Include but are not limited to: Evaluate existing site surveys to develop scope of work for site preparation requirements. Conduct site surveys at remote sites for telecommunications site preparation requirements. Draft site preparation scope of work for facilities based on site survey reports and facility data. Identify telecommunications contract CLINs required to complete site preparation. Develop cost estimates fo


Sponsored
4/23/2025 12:00:00 AM
Leidos
Des Plaines , IL

Description Have you ever wondered what it would be like to work with one of the BEST in government contracting? Ranked by Forbes in 2018 as a Top government contractor and one of the World's Most Ethical Companies, Team Leidos is one you don't want to overlook. Everything we do is built on commitment to do the right thing for our customers, our employees and our community. We embrace and solve some of the worlds toughest challenges. We're focused on ensuring our customers have the right tools, technologies and tactics to keep pace with an ever evolving world landscape. We know once you join Team Leidos, you are sure to go home at the end of each day knowing YOU MADE A DIFFERENCE, resulting in one of the most REWARDING careers you could have imagined. We Want You! The National Airspace Systems Integration Support (NISC) program at Leidos is seeking an Electronics Engineer to provide support to the Federal Aviation Administration (FAA) Central Service Area - Engineering Services Group l


Sponsored
2/28/2025 12:00:00 AM

Check more jobs information at Behrad

Job Title Average Behrad Salary Hourly Rate
2 Accountant $84,150 $40
3 Consultant $106,822 $51
4 Sales Manager $124,129 $60

Hourly Pay at Behrad

The average hourly pay at Behrad for an Electronic Engineer is $37 per hour. The location, department, and job description all have an impact on the typical compensation for Behrad positions. The pay range and total remuneration for the job title are shown in the table below. Behrad may pay a varying wage for a given position based on experience, talents, and education.
How accurate does $77,319 look to you?

FAQ about Salary and Jobs at Behrad

1. How much does Behrad pay per hour?
The average hourly pay is $37. The salary for each employee depends on several factors, including the level of experience, work performance, certifications and skills.
2. What is the highest salary at Behrad?
According to the data, the highest approximate salary is about $84,643 per year. Salaries are usually determined by comparing other employees’ salaries in similar positions in the same region and industry.
3. What is the lowest pay at Behrad?
According to the data, the lowest estimated salary is about $69,818 per year. Pay levels are mainly influenced by market forces, supply and demand, and social structures.
4. What steps can an employee take to increase their salary?
There are various ways to increase the wage. Level of education: An employee may receive a higher salary and get a promotion if they obtain advanced degrees. Experience in management: an employee with supervisory experience can increase the likelihood to earn more.