Drilling Engineer jobs in Hope, IN
Drilling Engineer is responsible for the design and implementation of oil and gas wells. Performs design evaluations and recommends alterations to improve safety, costs, and efficiency. Being a Drilling Engineer may conduct risk assessment and cost estimation. Requires a bachelor's degree in engineering. Additionally, Drilling Engineer is familiar with standard concepts, practices and procedures within a particular field. Typically reports to supervisor or manager. To be a Drilling Engineer typically requires 0-2 years of related experience. Works on projects/matters of limited complexity in a support role. Work is closely managed. (Copyright 2024 Salary.com)
Recently Added Drilling Engineer jobs
ENGINEER
- Naval Sea Systems Command (NAVSEA)
-
Crane, IN
FULL_TIME
-
Summary
You will serve as a Engineer in the Mission Integration Branch (WXYP) of the Force Level EW Division (WXY) of the Spectrum Warfare Dept (WX) of NAVAL SURFACE WARFARE CENTER.
This position is part of the Warfare Centers Personnel Demonstration Project. The ND-05 pay band encompasses positions equivalent to GS-14 and GS-15.
Learn more about this agency This job is open to- Career transition (CTAP, ICTAP, RPL)
- Individuals with disabilities
- Internal to an agency
- Military spouses
- Special authorities
Clarification from the agency
Current permanent employees of UIC 00164 and DoD Military Spouse Preference (MSP) eligibles.
Duties- You will be responsible for applying System-of-Systems (SoS), mission analysis and engineering knowledge to aid in determining program office integration priorities in support of Naval Integrated Fire Control From the Sea (NIFC-FTS) kill chains.
- You will be the Advanced Concepts Working Group (ACWG) Lead for the program office.
- You will be responsible for evaluating high level integration issues, identifying mission level needs, tying fleet gaps to k ill chains, reviewing intel reports, and distilling relevant war-game summaries.
- You will work with multiple program offices, fleet representatives, and requirement officers alike.
- You will provide high level kill chain analysis reports and include recommendations and/or courses of action (CoAs) for kill chain candidates.
- MSP/PPP applicants must currently hold the required security clearance.
- Must be a US Citizen.
- Must be determined suitable for federal employment.
- Must participate in the direct deposit pay program.
- New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check. To learn more about E-Verify, including your rights and responsibilities, visit e-verify.gov
- Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
- Males born after 12-31-59 must be registered for Selective Service.
- You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty. Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
- This position is covered under the Defense Acquisition Workforce Improvement Act (DAWIA). Certification in the Acquisition Functional Area and category assigned to the position is required within established category timeframes.
- Successful completion of a pre-employment drug test (including marijuana) is required. A tentative offer of employment will be rescinded if you fail to report to the drug test appointment or fail the test. You will be subject to random testing.
- This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites. You must be able to travel on military and commercial aircraft for extended periods of time.
In addition to the Basic Requirements for this position, your resume must also demonstrate at least one year of specialized experience equivalent to the next lower grade or pay band ND-04 (GS-12/13) in the Federal service or equivalent experience in the private or public sector Specialized experience must demonstrate the following: as a professional engineer analyzing and assessing system of systems engineering processes to improve or develop new program office integration priorities for mission support of electromagnetic warfare.
Additional qualification information can be found from the following Office of Personnel Management website:
https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series AND https://www.opm.gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/0800/files/all-professional-engineering-positions-0800.pdf
Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., professional, philanthropic, religious, spiritual, community, student, social). Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.
Education
Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
Successful completion of a professional engineering degree. To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics. Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
OR
Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico. Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: http://www.nspe.org
OR
Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U. S. Office of Personnel Management. For more information, please visit: http://www.nspe.org/Licensure/HowtoGetLicensed/index.html.
OR
Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above). The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above)
OR
Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance. Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.
Additional information
This position is covered by the Department of Defense Priority Placement Program.
Additional vacancies may be filled by this announcement.
A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.
Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants. Policy information may be found at: http://www.secnav.navy.mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.pdf
Temporary promotions may be extended up to 5 years at the discretion of management and in accordance with applicable regulations.
Temporary actions taken under this announcement may be made permanent without further competition.
Temporary actions taken under this announcement may be terminated at any time before the established not-to-exceed date.
PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation.
ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher. ICTAP candidates must provide copies of all of the following documentation at the time of application: 1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate. For more information about ICTAP eligibility please review the following link: https://www.usajobs.gov/Help/working-in-government/unique-hiring-paths/federal-employees/career-transition/
Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ). A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position.
A career with the U.S. government provides employees with a comprehensive benefits package. As a federal employee, you and your family will have access to a range of benefits that are designed to make your federal career very rewarding. Opens in a new windowLearn more about federal benefits.Review our benefits
Eligibility for benefits depends on the type of position you hold and whether your position is full-time, part-time or intermittent. Contact the hiring agency for more information on the specific benefits offered. - Career transition (CTAP, ICTAP, RPL)
- 9 Days Ago
ENGINEER
- NAVSEA Warfare Centers (NSWC/NUWC)
-
Crane, IN
FULL_TIME
- SummaryYou will serve as a Engineer in the Mission Integration Branch (WXYP) of the Force Level EW Division (WXY) of the Spectrum Warfare Dept (WX) of NAVAL SURFACE WARFARE CENTER.This position is par...
- 9 Days Ago
Engineer - R&D Engineer II
- TALENT Software Services
-
Spencer, IN
CONTRACTOR
- Job Description: Job PurposeDevelops products, materials, processes, or equipment for projects of moderate complexity.Under limited supervision/guidance, compiles, analyzes, and reports operational, t...
- 13 Days Ago
EV Engineer - Electrical Engineer
- LER TechForce
-
Columbus, IN
FULL_TIME
- Electrical Engineer – Battery Management Systems Are you looking for a role where you can use your knowledge of electric vehicles (EV) or battery systems (Client) to provide current product support? W...
- 14 Days Ago
Investment Engineer Platform Engineer
- Aberdeen Corporate Services Limited
-
Edinburgh, IN
FULL_TIME
- Job Description About Abrdn invests in a full range of asset classes from a number of geographies, including Edinburgh, London, Philadelphia, Boston and Singapore. In addition, the business has operat...
- 28 Days Ago
Systems Engineer
- SAIC
-
Crane, IN
FULL_TIME
- Job ID 2405568Location CRANE, IN, USDate Posted 2024-05-08Category Engineering and SciencesSubcategory Systems EngineerSchedule Full-timeShift Day JobTravel Yes, 10 % of the TimeMinimum Clearance Requ...
- 7 Days Ago
Filters
- Filter Jobs By posted time
- Within 1 Day
- Within 2-7
- Within 1 Month
- Within 3 Months
0 Drilling Engineer jobs found in Hope, IN area
Athletic Trainer - Injury Prevention Specialist
- Premise Health Systems
-
Columbus, IN
- Healthcare Without Rival Premise Health is the world's leading direct healthcare provider and one of the largest digital...
- 6/17/2024 12:00:00 AM
Maintenance Machinist - West - 2nd shift
- NTN Bearing Corp.
-
Columbus, IN
- Job Description JOB DESCRIPTION: Responsible for machining required parts/details to stated dimensions per drawings and/...
- 6/15/2024 12:00:00 AM
Mechanical Engineering Technician
- Talascend
-
Columbus, IN
- Talascend is currently seeking a Mechanical Engineering Technician for a direct hire opportunity with our client located...
- 6/15/2024 12:00:00 AM
Maintenance Machinist- West Plant 2nd Shift
- NTN Bearing Corp.
-
Columbus, IN
- Job Description JOB DESCRIPTION: Responsible for machining required parts/details to stated dimensions per drawings and/...
- 6/14/2024 12:00:00 AM
Machinist- Forge Plant 2nd Shift
- NTN Bearing Corp.
-
Columbus, IN
- Job Description JOB DESCRIPTION: Responsible for machining required parts/details to stated dimensions per drawings and/...
- 6/13/2024 12:00:00 AM
Electrical Assembly Technician
- Synerfac
-
Indianapolis, IN
- -Assemble the electrical system for drill rigs under engineering direction in accordance with our standards. We primaril...
- 6/13/2024 12:00:00 AM
Machine Safety Engineer
- INTELLISWIFT INC
-
Columbus, IN
- Job ID: 24-00978 Job id: CMI2JP00011375 Job title: Machine Safety Engineer Location: Columbus, IN 47201 Duration:6+ mont...
- 6/13/2024 12:00:00 AM
Electronics PPT Leader - Technical Specialist
- Cummins
-
Columbus, IN
- Electronics PPT Leader - Technical Specialist Description Electronics PPT Leader - Technical Specialist Our culture beli...
- 6/13/2024 12:00:00 AM
About Hope, Indiana
Hope is a town in Haw Creek Township, Bartholomew County, Indiana, United States, known for its historic character. The population was 2,102 at the 2010 census. It is part of the Columbus, Indiana, metropolitan statistical area.
Hope is located at 39°18′0″N 85°46′0″W / 39.30000°N 85.76667°W / 39.30000; -85.76667.
According to the 2010 census, Hope has a total area of 0.95 square miles (2.46 km2), all land....
Source: Wikipedia (as of 04/11/2019). Read more from Wikipedia
Income Estimation for Drilling Engineer jobs
$96,069 to $122,666
Hope, Indiana area prices
were up 1.3% from a year ago
were up 1.3% from a year ago
What does a Drilling Engineer do?
Drilling Engineer in Long Beach, CA
The drilling engineer is required to visit work sites, gather rig data, and prepare related well reports as daily costs and progress for each well are monitored.
February 18, 2020
Drilling Engineer in Fayetteville, AR
The drilling engineer must constantly evaluate projects as they develop to make sure they meet the predicted levels of commercial viability.
February 05, 2020
Drilling Engineer in Louisville, KY
Drilling engineers are in charge of the process of planning and drilling the wells.
January 20, 2020