Electrical Controls Engineer jobs in Gloster, LA
Electrical Controls Engineer designs, develops, and supervises all aspects of electrical control systems, equipment, and machinery. May be responsible for the installation and technical support of PLC based hardware and software. Being an Electrical Controls Engineer requires a bachelor's degree in electrical engineering and 0-2 years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Additionally, Electrical Controls Engineer relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision. Primary job functions do not typically require exercising independent judgment. Typically reports to a supervisor or manager. (Copyright 2024 Salary.com)
Recently Added Electrical Controls Engineer jobs
Electrical Engineer
- SLB
-
Shreveport, LA
FULL_TIME
-
Job Summary
The role of Electrical Engineer is to support the Engineering Lead and Product Engineering Manager. They will be accountable for the electrical scope and systems in large scale data centers across the design, construction, assembly, testing, installation, and commissioning phases. The Electrical Engineer will be responsible for checking and approving drawings / designs; interface communication, and ensuring the accuracy, reliability, efficiency, and safety of the electrical scope of work for Hyperscale Data Center Modules meets customer’s requirements and Industrial Standards.
The Electrical Engineer will play a critical role with supporting the plant during the manufacturing stage. They will also be assisting various stakeholders in troubleshooting site installation and commissioning problems.
Responsibilities
The Engineerwill support the goals and programs established by the management team. These roles and responsibilities include but are not limited to:- Checking and approving drawings, information, and documentation which meets Industrial standards to enable the manufacturing group and other departments to produce Data Center Infrastructure Modules.
- Attend and initiate Design and Development Planning and Review session to meet customer’s and industry’s need.
- Prepare TRs (Technical Requisitions) for electrical systems, fire systems, and various components.
- Review vendor quotations and provide feedback to procurement team.
- Prepare and complete various electrical engineering deliverable drawings, documents, and calculations such as electrical load list, cable sizing / schedule, single line diagrams.
- Design and complete earthing protection systems.
- Design and complete lighting studies and system.
- Prepare bulk MTOs (Material Take Offs) and detailed BOMs (Bill of Materials).
- Ability and willingness to think outside of the box to find creative and innovative solutions to reduce costs while managing impact to quality, cost, or schedule.
- Keeps informed of new developments and requirements affecting the organization for the purpose of recommending changes in programs and applications.
- Interprets, organizes, executes assignments in a self-driven and self-sufficient manner.
- Makes decisions independently on technical problems and methods and represents the organization in meetings to resolve important questions.
- Applies advanced or state-of-the-art knowledge and experience to resolve crucial issues and/or unique conditions. The knowledge and expertise required for this level of work usually results from progressive experience.
- Supervision received is essentially administrative, with assignments given in terms of broad general objectives and limits.
- Analyze electrical systems to identify and resolve issues, including load balancing, capacity planning, and power consumption optimization.
- Stays up to date with advancements in electrical engineering and data center technologies and recommend new technologies to improve the reliability and efficiency of our data center product line.
- Represent company with customers during review meetings. Act as the primary point of contact for clients, responding to their inquiries and concerns in a timely and professional manner.
- Provide technical support during the construction phase, responding to RFIs and addressing any issues that arise.
- Attend job site visits, project meetings, and commissioning activities as needed.
Minimum Job Qualifications- Bachelor of Science Degree in Electrical Engineering from a recognized university.
- Professional Engineering License (Strongly Preferred)
- A minimum of 7 years’ experience in electrical design and/or electrical engineering, with a focus on data center infrastructure.
- Ability to produce drawings/sketches to illustrate design/ideas.
- General knowledge and direct experience with the construction, operation, and maintenance of data center or building electrical systems.
- Experience with high-density data centers and hyperscale environments
- Understand the principle of electrical power and its components, procedures, and standards for power system equipment sizing and design.
- Understands the purpose of electrical system for facility.
- Knowledge of industry standards, codes, and regulations, including but not limited to
- IEC – International Electrotechnical Commission
- IBC – International Building Code
- OSHA – Occupational Safety and Health Administration
- NEC – National Electric Code
- NFPA – National Fire Protection Association
- Experience working with computer-aided design (CAD) and building information modeling (BIM) software.
- Fast track design/build projects and or multiple significant upgrade projects
- Detailed understanding of UPS (uninterruptable power sources), diesel generators, medium and low voltage electrical switchgear, power distribution units, variable frequency drives, automatic/static transfer switches, electrical control systems, low voltage rectification systems, and other critical electrical equipment found within data centers.
- Familiarity with medium and high voltage power distribution systems design
- Basic understanding of mechanical equipment and system design within data center driving or affecting electrical scope.
- Direct experience in negotiating with regulatory agencies regarding departures from code and ultimately achieving design approval and permitting.
- Mastery knowledge and proficiency in:
- Microsoft Office 365 Suite (Outlook, Word, Excel, PowerPoint, Teams, SharePoint)
- PDF Editor (Adobe, Foxit, or other equivalent)
- ETAP
- Dialux
- Operational knowledge in:
- SAP (ERP Tool w/ Engineering Modules and Transactions)
- Solid Works
- Autodesk Revit
- Autodesk BIM 360
- Autodesk AutoCAD
- Navisworks Manager / Freedom
- Express complex ideas effectively in both individual and group situations.
- Organize and express ideas clearly in written documents.
- Strong communication and collaboration skills, with the ability to work effectively with a cross-functional team.
P.E. Is strongly encouraged to have.
Disclaimer
SLB is an equal employment opportunity employer. Qualified applicants are considered without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran or military status, pregnancy (including pregnancy, childbirth and related medical conditions), marital status, or other characteristics protected by law. We are an “Equal Opportunity Employer". For more information regarding your rights, refer to the latest version of the "EEO is the Law" poster, the "EEO is the Law-Supplement" poster, and the "Pay Transparency Nondiscrimination Provision" located here: https://www.dol.gov/ofccp/regs/compliance/posters/ofccpost.htm
We will endeavor to make a reasonable accommodation / modification to the known physical or mental limitations of a qualified applicant with a disability to assist in the hiring process, unless the accommodation would impose an undue hardship on the operation of our business, in accordance with applicable federal, state, and local law. If you believe you require such assistance to complete this form or to participate in the interview process, please contact accommodationhotline@slb.com to request assistance. Please note that only those inquiries concerning a request for reasonable accommodation will be responded to.
We are committed to a culture where everyone feels like they belong. To learn more about our diversity, equity, inclusion commitments, please visit our Diversity & Inclusion section of our website for more information https://www.slb.com/who-we-are/guiding-principles/diversity-andinclusion
SLB is a VEVRAA Federal Contractor- priority referral Protected Veterans requested. - Just Posted
Electrical Engineer
- Above & Beyond Talent Acquisition, Inc.
-
Shreveport, LA
FULL_TIME
- Position Title – Official Job Title: Electrical EngineerLocation: On-site Shreveport , LA, 71129Status - : OnsiteStatus – Full Time/Direct Hire/Contract: Full TimePay Rate or Range: $100,000 yearlyCli...
- 4 Days Ago
Electrical Engineer
- Cameron, a Schlumberger company
-
Shreveport, LA
FULL_TIME
- Job SummaryThe role of Electrical Engineer is to support the Engineering Lead and Product Engineering Manager. They will be accountable for the electrical scope and systems in large scale data centers...
- 4 Days Ago
Process Controls Engineer
- Impact Solutions Inc
-
Shreveport, LA
FULL_TIME
- Overview: This person will be based at a manufacturing plant in the Shreveport area that employs approximately 150-200 people. The selling point of this role is the chance to be an integral part of a ...
- 4 Days Ago
Sr. Engineer, Process Controls
- Calumet Specialty Products Partners L.P.
-
Shreveport, LA
FULL_TIME
- Sr. Engineer, Process Controls Shreveport, LA, USA Req #1435 Tuesday, November 21, 2023 Who are we? At Calumet we deliver innovative specialty products trusted by companies across the globe. We are th...
- 9 Days Ago
Controls Engineer Supervisor
- Calumet Specialty Products Partners L.P.
-
Shreveport, LA
FULL_TIME
- Controls Engineer Supervisor Shreveport, LA, USA Req #1545 Wednesday, March 13, 2024 Who are we? At Calumet we deliver innovative specialty products trusted by companies across the globe. We are the f...
- 18 Days Ago
Filters
- Current Active Filter
- Gloster, LA
Clear All
- Filter Jobs By posted time
- Within 1 Day
- Within 2-7
- Within 1 Month
- Within 3 Months
0 Electrical Controls Engineer jobs found in Gloster, LA area
Service Technician
- Morgan Buick GMC Bossier City
-
Bossier City, LA
- Mike Morgan Automotive is looking for Certified Technicians to join our team. If you are tired of where you work and wan...
- 5/31/2024 12:00:00 AM
Electrical - Electronics Instrument Technician
- Snelling Staffing Services
-
Shreveport, LA
- Work activities may include any combination of the following tasks: Reads and interprets blueprints. Reads and interpret...
- 5/30/2024 12:00:00 AM
Veterinary Kennel Technician
- Alliance Animal Health
-
Shreveport, LA
- Company Description Companion Animal Medical Center is proud to serve Shreveport, LA and surrounding areas. We are dedic...
- 5/30/2024 12:00:00 AM
Test Lab Technician
- DXP Enterprises
-
Shreveport, LA
- Do you want to grow with us? At DXP we are passionate about what we do and driven to be the best solution for our indust...
- 5/29/2024 12:00:00 AM
Maintenance Technician II
- Camelot Facility Solutions
-
Shreveport, LA
- Job Description Job Description Job Summary: In a safe, efficient and professional manner the Level II Maintenance Techn...
- 5/29/2024 12:00:00 AM
Repair Technician
- Frymaster
-
Shreveport, LA
- Job Details Job Location Lincoln - Shreveport, LA Salary Range $27.14 - $29.37 Hourly Description Manufacturing Tester/T...
- 5/28/2024 12:00:00 AM
Auto Repair Specialist II
- CarMax, Inc.
-
Shreveport, LA
- 6121 - Shreveport - 765 Brook Hollow Drive, Shreveport, Louisiana, 71105 CarMax, the way your career should be! General ...
- 5/28/2024 12:00:00 AM
Commercial HVAC/R Technician
- Coolsys
-
Shreveport, LA
- Overview: With over 150 years of experience, CoolSys is the market-leading indoor environment solutions company. Our ful...
- 4/15/2024 12:00:00 AM
About Gloster, Louisiana
Gloster is an unincorporated community and census-designated place (CDP) in DeSoto Parish, Louisiana, United States. As of the 2010 census it had a population of 94.
Gloster is located 1.5 miles (2.4 km) east of U.S. Route 171, 17 miles (27 km) north of Mansfield, the DeSoto Parish seat, and 30 miles (48 km) south of Shreveport.
It is the nearest community to three places listed on the U.S. National Register of Historic Places:
Myrtle Hill Plantation House
Roseneath
Thomas Scott House...
Source: Wikipedia (as of 04/11/2019). Read more from Wikipedia
Income Estimation for Electrical Controls Engineer jobs
$63,611 to $76,781
Gloster, Louisiana area prices
were up 1.2% from a year ago
were up 1.2% from a year ago
What does an Electrical Controls Engineer do?
Electrical Controls Engineer in Lima, OH
This is an excellent opportunity for an experienced Electrical and Controls Engineer to join the Engineering team at ACE Winches. This is a challenging and interesting role which will specify and design electrical control systems, specify hardware and IO schedules, write and commission PLC and HMI software in accordance with relevant ACE and international standards.
February 19, 2020
Electrical Controls Engineer in Concord, NH
An intrinsic element of the role will be to provide support to the Workshop during build and test activities involving electrical and controls technical input.
January 20, 2020
Electrical Controls Engineer in Mcallen, TX
Electrical Controls Engineer, you will be responsible for preparing and studying technical drawings and specifications of electrical systems to ensure that installations and operations conform to KEITH Manufacturing Co.
January 19, 2020