Job Posting for Maintenance technician at Synerfac Technical Staffing

Repair or replace defective equipment parts, using hand tools and power tools, and reassemble equipment.-Perform routine preventive maintenance to ensure that machines continue to run smoothly, building systems operate efficiently, or the physical condition of buildings does not deteriorate.
Inspect drives, motors, and belts, check fluid levels, replace filters, or perform other maintenance actions, following checklists.
Use tools ranging from common hand and power tools, such as hammers, hoists, saws, drills, and wrenches, to precision measuring instruments and electrical and electronic testing devices.
Assemble, install or repair wiring, electrical and electronic components, pipe systems and plumbing, machinery, and equipment.
Diagnose mechanical problems and determine how to correct them, checking blueprints, repair manuals, and parts catalogs as necessary.
Inspect, operate, and test machinery and equipment to diagnose machine malfunctions.-Record type and cost of maintenance or repair work.
Clean and lubricate shafts, bearings, gears, and other parts of machinery.-Dismantle devices to access and remove defective parts, using hoists, cranes, hand tools, and power tools.
Plan and lay out repair work, using diagrams, drawings, blueprints, maintenance manuals, and schematic diagrams.-Order parts, supplies, and equipment from catalogs and suppliers, or obtain them from storerooms.
Adjust functional parts of devices and control instruments, using hand tools, levels, plumb bobs, and straightedges.-Paint and repair roofs, windows, doors, floors, woodwork, plaster, drywall, and other parts of building structures.
Operate cutting torches or welding equipment to cut or join metal parts.-Align and balance new equipment after installation.
Inspect used parts to determine changes in dimensional requirements, using rules, calipers, micrometers, and other measuring instruments.
Set up and operate machine tools to repair or fabricate machine parts, jigs and fixtures, and tools.-Maintain and repair specialized equipment and machinery found in cafeterias, laundries, hospitals, stores, offices, or factories.
Fabricate and repair counters, benches, partitions, or other wooden structures, such as sheds and outbuildings.-Estimate repair costs.
Lay brick to repair and maintain buildings, walls, arches and other structures.-Grind and reseat valves, using valve-grinding machines.
Test electrical systems or continuity of circuits in electrical wiring, equipment, or fixtures, using testing devices, such as ohmmeters, voltmeters, or oscilloscopes, to ensure compatibility and safety of system.
Inspect electrical systems, equipment, or components to identify hazards, defects, or the need for adjustment or repair, and to ensure compliance with codes-Follow blueprints to determine the location of wiring or equipment and to ensure conformance to building and safety codes.
Diagnose malfunctioning systems, apparatus, or components, using test equipment and hand tools to locate the cause of a breakdown and correct the problem-Advise management on whether continued operation of equipment could be hazardous.
Place conduit, pipes, or tubing, inside designated partitions, walls, or other concealed areas, and pull insulated wires or cables through the conduit to complete circuits between boxes.
Repair or replace wiring, equipment, or fixtures, using hand tools or power tools.-Install ground leads and connect power cables to equipment, such as motors.
Assemble, install, test, or maintain electrical or electronic wiring, equipment, appliances, apparatus, or fixtures.-Fasten small metal or plastic boxes to walls to house electrical switches or outlets.
Perform trouble shooting on drives and PLC"s when needed.-Install 480V and 110V circuit breaker installation on a quarterly basis-Relevant vocational training,-Current electrician"s license preferred-Or an equivalent amount of education and experience-Functional knowledge of flash arc protection equipment-Ability to properly and safely operate conduit benders and other position-specific equipment-Ability to read, interpret and follow schematics-Capability to program drives and PLC"s-Functional knowledge of electrical codes-Ability to safely and properly operate tools and equipment necessary for the position-Be able to work overtime as required

Last updated : 2024-05-13

Apply for this job

Receive alerts for other Maintenance technician job openings

Salary.com Estimation for Maintenance technician in Buffalo, NY

$53,471 - $70,503

For Employer

Looking to price a job for your company?

Price This Job

Maintenance technician

Job Posting for Maintenance technician at Synerfac Technical Staffing

Sign up to receive alerts about other jobs that are on the Maintenance technician career path.

Sign up to receive alerts about other jobs with skills like those required for the Maintenance technician.

Job openings at Synerfac Technical Staffing

Not the job you're looking for? Here are some other Maintenance technician jobs in the Buffalo, NY area that may be a better fit.

We don't have any other Maintenance technician jobs in the Buffalo, NY area right now.