I&C Design Engineer
Job Posting for I&C Design Engineer at UDR Consulting Inc
UDR is seeking qualified candidates for a I&C Design Engineer opportunity for our customer in Aiken, SC to support the Savannah River Site.
I&C Design Engineer
Close Date:5/29/2024
DUTIES
Provide design engineering staff augmentation support to SRNS. Primary responsibilities include engineering analysis, walkdowns, design development and generation of design output documents including but not limited to: P&IDs; Control Logics; Loop Diagrams; Instrument Indices; Setpoint Lists; Instrument and Control Valve Specifications; DCS and PLC Design; Instrument Location and Installation Design; Panel Layouts; and Vendor Document Review. Engineering services shall be provided using SRNS processes and procedures. Programmatic guidance will be provided by SRNS.
REQUIRED QUALIFICATIONS
Education:
BS Degree in one of the following disciplines: Mechanical Engineering, Electrical Engineering, Chemical Engineering, Nuclear Engineering, I&C Engineering or current registration as a Professional Engineer in one of the above disciplines. Will consider five (5) years of related design experience (in addition to the required 10 years design experience) as an equivalent to the education or registration requirements.
Experience/Skills:
Candidate must demonstrate ten (10) years of direct I&C design experience (within the last 15 years) in the nuclear or process chemical industry. Candidate must demonstrate design experience with process control instrumentation, PLCs and distributed control systems.
Experience with 2D Computer Aided Drafting and Design (CADD) is required.
Candidate must be able to perform weekly field walk downs of the job site for the engineering work being performed. These walk downs may involve construction sites with uneven surfaces and work in progress, walking for distances of over half a mile, climbing of ladders to access remote areas, dressing out in protective clothing and environments where a respirator is required.
Previous SRS Design Engineering or DOE facility experience is preferred.
Work Hours:
A 40-hour work week is scheduled. SRNS utilizes various work schedules; including 5/8s (8 hours/day; five days per week), 4/10s (10 hours/day; four days per week), and a 9/80s (9 hours/day, five days on week A and 4 days on week B). Work week excludes SRNS holidays. Each workday has a 30-minute unpaid lunch.
Area Security Access:
The candidate must be able to obtain and maintain a DOE “Q” security clearance. An active DOE clearance is not initially required to perform assigned duties. After award, the selected candidate will be notified when to apply for a clearance based on specific work assignments. Candidates who have possessed an active DOE clearance (“L” or “Q”) within the past two years are preferred.
UDR Consulting, INC is a Service-Disabled Veteran-Owned, Woman-Owned, Minority-Owned, Small Disadvantaged Business. An Equal Opportunity Employer that considers all qualified applicants for employment without regard to race, color, religion, sexual orientation, gender identity, national origin, protected Veterans, or individuals with disabilities. UDR also supports a drug-free work environment.
UDR offers highly competitive salaries and employee benefit packages structured to best suit your needs. We offer multiple individual and family benefit options including paid time off, medical, dental, life, vision, and disability insurance, and a pre-tax 401 (k) retirement account with Company matching contributions and 100% vesting for eligible participants beginning DAY 1.
https://udrconsultingincorporated.applytojob.com/apply/
I&C Design Engineer
Close Date:5/29/2024
DUTIES
Provide design engineering staff augmentation support to SRNS. Primary responsibilities include engineering analysis, walkdowns, design development and generation of design output documents including but not limited to: P&IDs; Control Logics; Loop Diagrams; Instrument Indices; Setpoint Lists; Instrument and Control Valve Specifications; DCS and PLC Design; Instrument Location and Installation Design; Panel Layouts; and Vendor Document Review. Engineering services shall be provided using SRNS processes and procedures. Programmatic guidance will be provided by SRNS.
REQUIRED QUALIFICATIONS
Education:
BS Degree in one of the following disciplines: Mechanical Engineering, Electrical Engineering, Chemical Engineering, Nuclear Engineering, I&C Engineering or current registration as a Professional Engineer in one of the above disciplines. Will consider five (5) years of related design experience (in addition to the required 10 years design experience) as an equivalent to the education or registration requirements.
Experience/Skills:
Candidate must demonstrate ten (10) years of direct I&C design experience (within the last 15 years) in the nuclear or process chemical industry. Candidate must demonstrate design experience with process control instrumentation, PLCs and distributed control systems.
Experience with 2D Computer Aided Drafting and Design (CADD) is required.
Candidate must be able to perform weekly field walk downs of the job site for the engineering work being performed. These walk downs may involve construction sites with uneven surfaces and work in progress, walking for distances of over half a mile, climbing of ladders to access remote areas, dressing out in protective clothing and environments where a respirator is required.
Previous SRS Design Engineering or DOE facility experience is preferred.
Work Hours:
A 40-hour work week is scheduled. SRNS utilizes various work schedules; including 5/8s (8 hours/day; five days per week), 4/10s (10 hours/day; four days per week), and a 9/80s (9 hours/day, five days on week A and 4 days on week B). Work week excludes SRNS holidays. Each workday has a 30-minute unpaid lunch.
Area Security Access:
The candidate must be able to obtain and maintain a DOE “Q” security clearance. An active DOE clearance is not initially required to perform assigned duties. After award, the selected candidate will be notified when to apply for a clearance based on specific work assignments. Candidates who have possessed an active DOE clearance (“L” or “Q”) within the past two years are preferred.
UDR Consulting, INC is a Service-Disabled Veteran-Owned, Woman-Owned, Minority-Owned, Small Disadvantaged Business. An Equal Opportunity Employer that considers all qualified applicants for employment without regard to race, color, religion, sexual orientation, gender identity, national origin, protected Veterans, or individuals with disabilities. UDR also supports a drug-free work environment.
UDR offers highly competitive salaries and employee benefit packages structured to best suit your needs. We offer multiple individual and family benefit options including paid time off, medical, dental, life, vision, and disability insurance, and a pre-tax 401 (k) retirement account with Company matching contributions and 100% vesting for eligible participants beginning DAY 1.
https://udrconsultingincorporated.applytojob.com/apply/
Estimate Salary for I&C Design Engineer in Aiken, SC
$102,206 (Medium)
$93,536 (25th)
$111,373 (75th)
For Employer
Looking for Real-time Job Posting Salary Data?
Keep a pulse on the job market with advanced job matching technology.
If your compensation planning software is too rigid to deploy winning incentive strategies, it’s time to find an adaptable solution.
Compensation Planning
Enhance your organization's compensation strategy with salary data sets that HR and team managers can use to pay your staff right.
Surveys & Data Sets
Sign up to receive alerts about other jobs that are on the I&C Design Engineer career path.
Click the checkbox next to the jobs that you are interested in.
Sign up to receive alerts about other jobs with skills like those required for the I&C Design Engineer.
Click the checkbox next to the jobs that you are interested in.
-
Computer Simulation Skill
-
Income Estimation: $82,929 - $114,592
-
Income Estimation: $87,333 - $106,645
-
-
Cost Estimation Skill
-
Income Estimation: $78,245 - $107,375
-
Income Estimation: $78,067 - $112,388
-
View Core, Job Family, and Industry Job Skills and Competency Data for more than 15,000 Job Titles
Skills Library
Job openings at UDR Consulting Inc
UDR Consulting Inc
Aiken, SC
Full Time
UDR Consulting Inc
Aiken, SC
Full Time
UDR Consulting Inc
Aiken, SC
Full Time
UDR Consulting Inc
Carlsbad, NM
Full Time
Not the job you're looking for? Here are some other I&C Design Engineer jobs in the Aiken, SC area that may be a better fit.
We don't have any other I&C Design Engineer jobs in the Aiken, SC area right now.
Fluor Corp, Aiken, SC
Electrical Engineer (Creo Design)
TekOne IT Services Pvt. Ltd., Augusta, GA