IT Engineer Salary at The Ipgc BETA

How much does a The Ipgc IT Engineer make?

As of April 2025, the average annual salary for an IT Engineer at The Ipgc is $63,957, which translates to approximately $31 per hour. Salaries for IT Engineer at The Ipgc typically range from $58,639 to $68,659, reflecting the diverse roles within the company.

It's essential to understand that salaries can vary significantly based on factors such as geographic location, departmental budget, and individual qualifications. Key determinants include years of experience, specific skill sets, educational background, and relevant certifications. For a more tailored salary estimate, consider these variables when evaluating compensation for this role.

DISCLAIMER: The salary range presented here is an estimation that has been derived from our proprietary algorithm. It should be noted that this range does not originate from the company's factual payroll records or survey data.

Website:
agrateconcept.com
Size:
<25 Employees
Revenue:
<$5M
Industry:
Construction

The IPGC clearly provides more open surface area to capture surface runoff: The abundant open area provided by the IPGC allows for more runoff water to enter the pipe which results in a lower ponded depth of water during storm events. Therefore, the IPGC will clearly out perform PVC tees with grate caps. The IPGC drainage pipe will perform as a grate inlet, catch basin, and storm drain all at the same time. If the open flow area provided on a pipe surface exceeds the cross sectional area of the pipe itself, which occurs with relatively short sections of IPGC, the pipe size will dictate the amount of flow that can be conveyed. As seen in the above photo, the IPGC provides substantially more open flow area on the pipe surface than the standard perforated PVC pipe. The following text discusses several of the inadequacies associated with perforated pipe that the IPGC will effectively accomodate. The IPGC open slits allow for an unsubmerged flow state if installed fully or partially above the ground surface at the capture point. Each IPGC open slit will perform as a one-sided weir (on-grade) or a two sided weir (in a sump) until the contributing flow is large enough to submerge the entire pipe. The point at which the IPGC open slits become submerged is dictated by several factors inlcuding the pipe size, pipe slope, and the contributing flow rate. The section length of the IPGC is another important factor as larger spans contain more open slits (or open slit area). If used as a sump inlet, the standard perforated PVC pipe would become submerged at a lower flowrate than the IPGC since: The standard perforated pipe was never intended to capture runoff at the ground surface and is therefore installed beneath the surface. The runoff must first infiltrate the bedding material before it could be captured and conveyed by a buried perforated pipe. Once the bedding material begins to saturate, the perforated pipes will begin to convey. However, if the open slits on the IPGC can be at least partially exposed, conveyance ...

See similar companies related to The Ipgc

What Skills Does a person Need at The Ipgc?

At The Ipgc, specify the abilities and skills that a person needs in order to carry out the specified job duties. Each competency has five to ten behavioral assertions that can be observed, each with a corresponding performance level (from one to five) that is required for a particular job.

  1. Troubleshooting: Troubleshooting is a form of problem solving, often applied to repair failed products or processes on a machine or a system. It is a logical, systematic search for the source of a problem in order to solve it, and make the product or process operational again. Troubleshooting is needed to identify the symptoms. Determining the most likely cause is a process of elimination—eliminating potential causes of a problem. Finally, troubleshooting requires confirmation that the solution restores the product or process to its working state. In general, troubleshooting is the identification or diagnosis of "trouble" in the management flow of a system caused by a failure of some kind. The problem is initially described as symptoms of malfunction, and troubleshooting is the process of determining and remedying the causes of these symptoms. A system can be described in terms of its expected, desired or intended behavior (usually, for artificial systems, its purpose). Events or inputs to the system are expected to generate specific results or outputs. (For example, selecting the "print" option from various computer applications is intended to result in a hardcopy emerging from some specific device). Any unexpected or undesirable behavior is a symptom. Troubleshooting is the process of isolating the specific cause or causes of the symptom. Frequently the symptom is a failure of the product or process to produce any results. (Nothing was printed, for example). Corrective action can then be taken to prevent further failures of a similar kind.
  2. Computer Systems: A computer system is a set of integrated devices that input, output, process, and store data and information. Computer systems are currently built around at least one digital processing device.
  3. Customer Service: Customer service is the provision of service to customers before, during and after a purchase. The perception of success of such interactions is dependent on employees "who can adjust themselves to the personality of the guest". Customer service concerns the priority an organization assigns to customer service relative to components such as product innovation and pricing. In this sense, an organization that values good customer service may spend more money in training employees than the average organization or may proactively interview customers for feedback. From the point of view of an overall sales process engineering effort, customer service plays an important role in an organization's ability to generate income and revenue. From that perspective, customer service should be included as part of an overall approach to systematic improvement. One good customer service experience can change the entire perception a customer holds towards the organization.
  4. Technical Support: Offering hands-on assistance and solutions to end-users in addressing and troubleshooting technical issues.
  5. Operating System: Maintaining software that runs on a computer that serves as an interface between computer hardware components and the user.

Related Jobs

Hiring Now!
Fredericksburg , TX

Planet Healthcare is seeking a travel nurse RN Telemetry for a travel nursing job in Fredericksburg, Texas. Job Description & Requirements Specialty: Telemetry Discipline: RN Start Date: ASAP Duration: 13 weeks 36 hours per week Shift: 12 hours, days Employment Type: Travel Planet Healthcare Job ID #68592487. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. About Planet Healthcare Delivering Vital Healthcare Talent. Today. Planet Healthcare is a global leader in clinical staffing because we take a candidate-first approach. We pride ourselves on a consultative method and help to create the right opportunity, at the right time, with each healthcare professional. The recruitment engine at Planet Healthcare is driven by leaders in this market, who understand the market demands and trends within your specialty. With a wide array of job opportunities and geographic diversity in our client base, we are your a


Sponsored
4/13/2025 12:00:00 AM
Albany International Corp.
Boerne , TX

1st shift opening (M-F 6AM-2PM) Put Safety first at all times, never compromise on safety for the obtainment of other objectives. Responsible for health and safety of themselves and coworkers. Visual inspection of composite parts Dimensional measurements using calipers, micrometers, height gages, etc. Comparison and evaluation of certifications and supporting data to specifications Inspection of Aircraft parts to ensure compliance to important regulatory and contractual requirements. Observe Safety policies and programs including work place organization. Confirm and Approve incoming materials, in-process materials and finished products using specifications; visual evaluation, property measurements, and other tests; Reject unacceptable materials. Document inspection results by written reports & electronic data entry. Maintain documents to ensure traceability of all materials and processes. Input data into database or SAP Proper use and documentation of measurement equipment. Continuousl


Sponsored
4/13/2025 12:00:00 AM
Loves Travel Stops & Country Store
Comfort , TX

Req ID: 455342 Address: 43 US Highway 87 Comfort, TX, 78013 Benefits: * Fuel Your Growth with Love's - company funded tuition assistance program * Paid Time Off * Flexible Scheduling * 401(k) – 100% match up to 5% * Medical/Dental/Vision Insurance after 30 days * Competitive Pay * Career Development * Hiring Immediately   Welcome to Love’s! Diesel Technicians work in a fast-paced environment and maintain clean places with friendly faces. You will interact with customers & drivers from all over, making their travels and their day better.    Job Functions:   Troubleshoot and repair light mechanical issues that may include wheel-end assemblies, electrical systems, suspensions, A/C, or engine components Assist customers with roadside services Provide preventative maintenance services Ability to move, lift 75+ pounds working in close quarters. Ability to work in various temperatures. Always put the safety and satisfaction of your customers first, complying with company safety policies & pro


Sponsored
4/12/2025 12:00:00 AM
Albany International Corp.
Boerne , TX

Job Responsibilities The role is responsible for leading capital planning, business continuity, process and equipment capacity, and facility layout. Integral in equipment selection and responsible to commission, improve, and decommission said equipment. Planning and project organization - ability to plan over a 3-18 month time span involving multiple inputs from external and internal customers. The Maintenance & Facility Manager will develop and execute preventive maintenance plans, serve as building systems technical expert and provide leadership of Maintenance personnel and day-to-day operation of building systems and staff. Active "hands-on" leadership. Responsible for all aspects regarding Safety, Quality, Delivery, & Cost (SQDC) of Maintenance Department Lead, coach, and influence all direct and indirect employees affiliated with the Department. This includes not only the Value Stream Leaders, Team Leaders and Technicians but the Quality Engineer, Manufacturing/Process Engineer, P


Sponsored
4/12/2025 12:00:00 AM
Frost & Keeling Assoc. Inc
Boerne , TX

About Us: With over 40 yearsof excellence in the industry, we are a leading commercial mechanicalcontracting company renowned for our dedication to delivering top-qualityservices to our clients. Our expertise spans a wide range of commercialprojects, and we take pride in our team's commitment to excellence. Position: HVACForeman Responsibilities: - Lead and overseeHVAC projects for commercial clients, ensuring successful project executionfrom start to finish. - Supervise andguide a skilled crew of HVAC technicians, fostering teamwork and maintaininghigh work standards. - Read, interpret,and implement complex engineering plans, specifications, and Submittalsaccurately. - Collaborateclosely with project managers and other teams to coordinate schedules,resources, and materials efficiently. - Attend projectmeetings and maintain regular communication with clients and internalstakeholders, providing updates on project progress. - Oversee equipmentmaintenance, troubleshooting, and repairs as


Sponsored
4/12/2025 12:00:00 AM
James Avery Artisan Jewelry
Kerrville , TX

Job Summary: We are seeking a highly skilled and experienced Cost Accountant to join our Accounting team within a vertically integrated manufacturing & retail company. The ideal candidate will be responsible for executing general ledger activities, monitoring inventory control, and analyzing manufacturing operating expenses, variances, product costs, and inventory valuation. WHAT YOU WILL BE DOING: General Ledger Management: Maintain and reconcile the general ledger accounts related to manufacturing operations, LIFO/FIFO inventory, and Cost of Goods Sold. Ensure accurate and timely month-end and year-end close processes. Prepare and review journal entries, account reconciliations, and financial statements. Inventory Control: Analyze and monitor inventory accuracy via system-driven cycle count programs, physical inventory observations, and monthly inventory reporting. Perform monthly site visits and process audits covering inventory accuracy and shrink. Collaborate with internal departm


Sponsored
4/12/2025 12:00:00 AM
Teph Seal Auto Appearance
Boerne , TX

Overview: Flat Rate Detail Shop Position(s) Available. Are you a team player who is focused on providing exemplary customer service and who performs well in a fast paced work environment? Looking for the following position: Detail Specialist 1 - Some experience Detail Specialist 2 - 2 plus years experience Maintain the facilities of the store to produce high quality service. Ensure customers are serviced at the highest level of satisfaction through quality service/products, courteous employees and quick response to all customer inquiries and/or complaints establishing conclusions in a timely manner. Driving, detailing, and cleaning vehicles. Teph Seal Auto Appearance, a privately-held company, operates detail/reconditioning centers in auto dealerships across the United States. Our strong team of dedicated professionals is our most powerful asset, allowing us to develop dynamic detail solutions for a wide variety of auto dealerships. Our culture of challenging the status quo makes each


Sponsored
4/11/2025 12:00:00 AM
Hiring Now!
Kerrville , TX

Planet Healthcare is seeking a travel nurse RN Med Surg / Telemetry for a travel nursing job in Kerrville, Texas. Job Description & Requirements Specialty: Med Surg / Telemetry Discipline: RN Start Date: 04/28/2025 Duration: 13 weeks 36 hours per week Shift: 12 hours, nights Employment Type: Travel Planet Healthcare Job ID #68771354. Pay package is based on 12 hour shifts and 36 hours per week (subject to confirmation) with tax-free stipend amount to be determined. About Planet Healthcare Delivering Vital Healthcare Talent. Today. Planet Healthcare is a global leader in clinical staffing because we take a candidate-first approach. We pride ourselves on a consultative method and help to create the right opportunity, at the right time, with each healthcare professional. The recruitment engine at Planet Healthcare is driven by leaders in this market, who understand the market demands and trends within your specialty. With a wide array of job opportunities and geographic diversity in our c


Sponsored
4/9/2025 12:00:00 AM

Check more jobs information at The Ipgc

Job Title Average The Ipgc Salary Hourly Rate
2 Project Manager, ERP $118,335 $57
3 Receptionist $30,114 $14

Hourly Pay at The Ipgc

The average hourly pay at The Ipgc for an IT Engineer is $31 per hour. The location, department, and job description all have an impact on the typical compensation for The Ipgc positions. The pay range and total remuneration for the job title are shown in the table below. The Ipgc may pay a varying wage for a given position based on experience, talents, and education.
How accurate does $63,957 look to you?

FAQ about Salary and Jobs at The Ipgc

1. How much does The Ipgc pay per hour?
The average hourly pay is $31. The salary for each employee depends on several factors, including the level of experience, work performance, certifications and skills.
2. What is the highest salary at The Ipgc?
According to the data, the highest approximate salary is about $68,659 per year. Salaries are usually determined by comparing other employees’ salaries in similar positions in the same region and industry.
3. What is the lowest pay at The Ipgc?
According to the data, the lowest estimated salary is about $58,639 per year. Pay levels are mainly influenced by market forces, supply and demand, and social structures.
4. What steps can an employee take to increase their salary?
There are various ways to increase the wage. Level of education: An employee may receive a higher salary and get a promotion if they obtain advanced degrees. Experience in management: an employee with supervisory experience can increase the likelihood to earn more.